Power
Our inventory includes over 1,000 power distribution units and more kilometers of cable than we can count. Each unit is meticulously maintained and tested to ensure safety and reliability. We also stock hundreds of meters of cable ramp to keep your event site safe and organized.
Service Levels
1 x 13a Metal Clad Twin Socket – 32a 1ph I/O
1 x 13a Metal Clad Twin Socket – 32a 1ph I/O
1 x 13a Outdoor IP66 Twin Socket – 32a 1ph I/O
1 x 13a Outdoor IP66 Twin Socket – 32a 1ph I/O
16a Plugboard 6 x 13a, 1 x 16a – Black Plastic Box
16a Plugboard 6 x 13a, 1 x 16a – Black Plastic Box
All Continents to UK Travel Adaptor – Black 13a
All Continents to UK Travel Adaptor – Black 13a
BGG FUSTEQ FQ110k 100kVA Ultra-silent Stage V Diesel Generator
BGG 100kVA StageV Generator Hire
The BGG FUSTEQ FQ110k is a premium100kVA Ultra-silent generator set. It is based around a fully compliant STAGE V (also known as Stage Five or StageV) engine. This means it is a HVO / Diesel Generator powered generator that meets all the latest emissions regulations. The BGG 100kVA generator can be configured either as a road towable unit, or skid mounted for HGV transport. The generator has integral fuel and AdBlue tanks as well as options for an external fuel tank connection. Using the internal tank only, generator run time is approximately 20 hours.
The BGG 100kVA / FQ110k is fitted with an ultra-silent compact canopy. The noise output is a very low 53dBA @ 7m – the quietest of all our generators.
Output Power & Sync Options
The BGG 100kVA generator has a three phase output delivering approximately 144A per phase (at 230V). There are plenty of power outlet connections onboard. These include PowerLock, 125A 3P, 63A 3P plus a 16A 1p for easy connections.
Due to the advanced Deep Sea Electronics control panel, it can be run as a stand alone set, or multiple sets can be fully synchronised for greater output or redundancy. They can also be configured to run in a redundant backup configuration with one unit active and the other as an automatically starting standby set.
Remote telemetry (and location tracking) hardware is installed within these generators, so operational status and runtimes can be monitored remotely.
BGG 100kVA StageV Generator – Ready to hire now from IPS
IPS run multiple BGG 100kVA generators and they can be either collected from our Milton Keynes based warehouse, or we can deliver them to site. They form part of our extensive hire range also including 20kVA and 40kVA StageV Generators. Ready to hire at IPS along with a range of single and three phase power distribution, cable ramp, site lighting. Plus everything else you need for technical event production.
CableGuard Blackline DDA Wheelchair 2 Way Cable Ramp Section 0.92m RED
BL2-19-WR
DDA compliant for pedestrian and low volume vehicular traffic.
2 channels (5 channel version also available).
Black lids and red side ramps for high visibility.
Maximum load per axle 4763 Kg @ 20degC.
CableGuard Blackline DDA Wheelchair 5 Way Cable Ramp Section 0.92m RED
BL5-19-WR
DDA compliant for pedestrian and low volume vehicular traffic.
2 channels (5 channel version also available).
Black lids and red side ramps for high visibility.
Maximum load per axle 4763 Kg @ 20degC.
CableGuard Red Floor – Redline 5 Way Adapter Cable Ramp Section 0.5m RED
CableGuard Red Floor – Redline 5 Way Adapter Cable Ramp Section 0.5m RED
CableGuard Red Floor DDA 5 Way Cable Ramp Centre Section 0.9m RED
Heavy Duty 5 Channel Centre piece for use with high volume vehicular traffic and all pedestrian traffic.
Available with standard and wheelchair access ramps.
Connect the 5 slot centre pieces together to provide a flat floor surface protecting as many cables as required.
Maximum load per axle 9140 Kg @ 20degC
Cable Guard Redfloor DDA Cable Ramp is a multi-piece ramp assembly typically comprising of a 5 channel centre section and 1
male and 1 female wing assembly. As part of this series we also stock a single channel drop over piece which will accept our 35mm
125a 3pn cable; it can be used independently with a pair of wings, or interconnected with the 5 channel centre section.
CableGuard Red Floor DDA Wheelchair Ramp Wing 0.9m Female RED
Wheelchair Female Ramp for Red Floor 3 Centre (RF3-55-C) and Red Floor 5 Centre (RF5-31-C).
CableGuard Red Floor DDA Wheelchair Ramp Wing 0.9m Male RED
Wheelchair Male Ramp for Red Floor 3 Centre (RF3-55-C) and Red Floor 5 Centre (RF5-31-C).
CableGuard Red Floor Modular Single Channel Dropover Section 0.9m BLACK
Connects directly to our Red Floor Mobility Access Ramp with our Red Floor 5 Channel Cable Ramp (RF5-31) or via the intermediate piece to our Red Floor 3 Channel Cable Ramp (RF3-55).
Can also be individually connected to our Red Floor 5 side ramps (RF5-31-FR and RF5-31-MR) to allow the user to protect as many cables as required.
Drop over design eliminates the need for protective lids and eases cable handling.
Suitable for high volume vehicular traffic.
Manufactured from a proprietary UV stabilised and halogen free durable polyurethane, non conductive material.
Includes the same unique anti slip tread pattern as all our CableGuards at the surface.
Maximum load per axle 9140 Kg @ 20degC.
CableGuard Redline – Red Floor 5 Way Adapter Cable Ramp Section 0.5m RED
CableGuard Redline – Red Floor 5 Way Adapter Cable Ramp Section 0.5m RED
CableGuard Redline 5 Way Cable Ramp Section 0.91m RED
RL5-33-SL
CableGuard Redline 5 Channel with scalloped lid gives a total channel height of 35mm which will take a 125a 3pn cable. The scalloped lid version is also compatible with the standard CableGaurd Redline 5 Channel. This is the equivelant of the Adam Hall Defender Midi.
Heavy duty 5 channel with Dog-bone connectors for use with high volume vehicular traffic.
Highly visible with red extra thick lids, black base and low angle (20deg) black side ramps.
Increased channel height ideal for larger cable diameters.
Maximum load per axle 9140kg @ 20degC.
Checkers GD2X75 DDA Wheelchair 2 Way Cable Ramp 0.91m RED
Checkers GD5X75 and GD2X75 DDA Wheelchair Cable Ramp is a low profile DDA ramp which we have in both a 2 channel and 5 channel variant, it will take a 32a 3pn cable. The 2 channel and 5 channel ramps are not interconnectable.
Checkers GD5X75 DDA Wheelchair 5 Way Cable Ramp 0.92m RED
Checkers GD5X75 and GD2X75 DDA Wheelchair Cable Ramp is a low profile DDA ramp which we have in both a 2 channel and 5 channel variant, it will take a 32a 3pn cable. The 2 channel and 5 channel ramps are not interconnectable.
Defender 3 Cable Ramp – 3 Way 1m YELLOW
Heavy duty cable ramp section with 3 large channels capable of taking a 125a 3ph cable.
Defender Midi 5 Cable Ramp – 5 Way 0.87m YELLOW
Heavy duty cable ramp sections which will take a 63a 3ph. Will accomodate a single 125a 3ph in the middle channel.
Defender Midi 5 Cable Ramp – DDA Wheelchair Ramp Set 0.87m BLUE
Heavy duty cable 5 channel DDA cable ramp section designed to provide a DDA compliant crossing in a run of Adam Hall Defender Midid. THese ramp sections are capable of taking a 125a 3ph.
Defender Midi 5 Cable Ramp Curve – 5 Way 45deg YELLOW
45deg section of Defender Midi 5 Cable Ramp
Generac V20 LED Tower Light 4x LED Flood, Eye Hitch, 16a In & 1x 16a Out
Generac V20 LED Tower Light Hire
The Generac V20 light tower delivers powerful illumination with high‑efficiency LED floodlights. Easy to deploy with a road towable trailer format. Featuring more than 5 days of running time and one of the lowest sound pressure levels in the industry. These tower lights are a popular choice for all kinds of outdoor event applications.
The V20 is fitted with a GTL01 digital controller. This enables every function of the light tower to he managed for the best ease of use.
Generac LED lamps
4 x 320W high efficiency LED floodlights designed by Generac Mobile. Following site best practice, the floodlights are powered with a low voltage 48 Volt supply. No more high voltages on external cables. Safety as a must!
Rapid Locking Stabilizers
The special shape of the adjustable stabilizers allows the operator to level the V20 light tower in few seconds.
The lowest noise level
Innovation means also decreasing the noise level! The V20 light tower is quiet in operation emiting only 58 dB(A) @ 7 metres. That is a lot less than from many concrete-spattered units you’d otherwise see from national plant hire suppliers.
Long running time
Packed with fuel saving features, the V20 includes a the small effienent engine and LED lamps. This means it can run for up to 143 hours without refuelling.
Double power – Auxilary output
You can connect a V20 to another V20 and run two lighting towers with only one engine. Alternatively the onboard 16A outlet is very handy for LED Festoon to create a complete stand alone installation. Plus it could also be used for a kettle so the site team can have a quick brew out onsite too!
Generac LED Tower Light: Ready to hire from Milton Keynes now
Road Towable HVO/Diesel powered Event Site lighting. Ready to hire at IPS along with a range of generators, single and three phase power distribution, cable ramp, site lighting. Plus everything else you need for technical event production.
Remember if you are picking this unit up, this unit is fitted with a eye type hitch (not the ball type).
Hybrid Cable (True1 + 5 Pin DMX) 1.5m
Hybrid multicore DMX signal plus power cables for linking lighting fixtures together. Convenient single outer jacket for speed of rigging while allowing the user to keep cable runs neat and tidy.
These British manufactured cables are finished using nylon braided sleeving over the signal cable tail for maximum durability. Featuring genuine all black Neutrik connectors, the cables are fitted with Neutrik 5-Pin XLR and powerCON TRUE1-TOP connectors. Nylon braided signal cable is secured by adhesive lined heatshrink. The three core 2.5mm power cable is suitable for all lighting applications, and the 110%E2%84%A6 balanced data cable is approved for applications such as RS422, RS485, DMX512, and timecode.
All cables are labelled with their colour length identifier as well as a unique IPS asset ID number. Available in a range of lengths to suit your application – and of course they can also be connected to extend too if needed.
Hybrid Cable (True1 + 5 Pin DMX) 10m
Hybrid multicore DMX signal plus power cables for linking lighting fixtures together. Convenient single outer jacket for speed of rigging while allowing the user to keep cable runs neat and tidy.
These British manufactured cables are finished using nylon braided sleeving over the signal cable tail for maximum durability. Featuring genuine all black Neutrik connectors, the cables are fitted with Neutrik 5-Pin XLR and powerCON TRUE1-TOP connectors. Nylon braided signal cable is secured by adhesive lined heatshrink. The three core 2.5mm power cable is suitable for all lighting applications, and the 110%E2%84%A6 balanced data cable is approved for applications such as RS422, RS485, DMX512, and timecode.
All cables are labelled with their colour length identifier as well as a unique IPS asset ID number. Available in a range of lengths to suit your application – and of course they can also be connected to extend too if needed.
Hybrid Cable (True1 + 5 Pin DMX) 15m
Hybrid multicore DMX signal plus power cables for linking lighting fixtures together. Convenient single outer jacket for speed of rigging while allowing the user to keep cable runs neat and tidy.
These British manufactured cables are finished using nylon braided sleeving over the signal cable tail for maximum durability. Featuring genuine all black Neutrik connectors, the cables are fitted with Neutrik 5-Pin XLR and powerCON TRUE1-TOP connectors. Nylon braided signal cable is secured by adhesive lined heatshrink. The three core 2.5mm power cable is suitable for all lighting applications, and the 110%E2%84%A6 balanced data cable is approved for applications such as RS422, RS485, DMX512, and timecode.
All cables are labelled with their colour length identifier as well as a unique IPS asset ID number. Available in a range of lengths to suit your application – and of course they can also be connected to extend too if needed.
Hybrid Cable (True1 + 5 Pin DMX) 1m
Hybrid multicore DMX signal plus power cables for linking lighting fixtures together. Convenient single outer jacket for speed of rigging while allowing the user to keep cable runs neat and tidy.
These British manufactured cables are finished using nylon braided sleeving over the signal cable tail for maximum durability. Featuring genuine all black Neutrik connectors, the cables are fitted with Neutrik 5-Pin XLR and powerCON TRUE1-TOP connectors. Nylon braided signal cable is secured by adhesive lined heatshrink. The three core 2.5mm power cable is suitable for all lighting applications, and the 110%E2%84%A6 balanced data cable is approved for applications such as RS422, RS485, DMX512, and timecode.
All cables are labelled with their colour length identifier as well as a unique IPS asset ID number. Available in a range of lengths to suit your application – and of course they can also be connected to extend too if needed.
Hybrid Cable (True1 + 5 Pin DMX) 20m
Hybrid multicore DMX signal plus power cables for linking lighting fixtures together. Convenient single outer jacket for speed of rigging while allowing the user to keep cable runs neat and tidy.
These British manufactured cables are finished using nylon braided sleeving over the signal cable tail for maximum durability. Featuring genuine all black Neutrik connectors, the cables are fitted with Neutrik 5-Pin XLR and powerCON TRUE1-TOP connectors. Nylon braided signal cable is secured by adhesive lined heatshrink. The three core 2.5mm power cable is suitable for all lighting applications, and the 110%E2%84%A6 balanced data cable is approved for applications such as RS422, RS485, DMX512, and timecode.
All cables are labelled with their colour length identifier as well as a unique IPS asset ID number. Available in a range of lengths to suit your application – and of course they can also be connected to extend too if needed.
Hybrid Cable (True1 + 5 Pin DMX) 2m
Hybrid multicore DMX signal plus power cables for linking lighting fixtures together. Convenient single outer jacket for speed of rigging while allowing the user to keep cable runs neat and tidy.
These British manufactured cables are finished using nylon braided sleeving over the signal cable tail for maximum durability. Featuring genuine all black Neutrik connectors, the cables are fitted with Neutrik 5-Pin XLR and powerCON TRUE1-TOP connectors. Nylon braided signal cable is secured by adhesive lined heatshrink. The three core 2.5mm power cable is suitable for all lighting applications, and the 110%E2%84%A6 balanced data cable is approved for applications such as RS422, RS485, DMX512, and timecode.
All cables are labelled with their colour length identifier as well as a unique IPS asset ID number. Available in a range of lengths to suit your application – and of course they can also be connected to extend too if needed.
Hybrid Cable (True1 + 5 Pin DMX) 3m
Hybrid multicore DMX signal plus power cables for linking lighting fixtures together. Convenient single outer jacket for speed of rigging while allowing the user to keep cable runs neat and tidy.
These British manufactured cables are finished using nylon braided sleeving over the signal cable tail for maximum durability. Featuring genuine all black Neutrik connectors, the cables are fitted with Neutrik 5-Pin XLR and powerCON TRUE1-TOP connectors. Nylon braided signal cable is secured by adhesive lined heatshrink. The three core 2.5mm power cable is suitable for all lighting applications, and the 110%E2%84%A6 balanced data cable is approved for applications such as RS422, RS485, DMX512, and timecode.
All cables are labelled with their colour length identifier as well as a unique IPS asset ID number. Available in a range of lengths to suit your application – and of course they can also be connected to extend too if needed.
Hybrid Cable (True1 + 5 Pin DMX) 5m
Hybrid multicore DMX signal plus power cables for linking lighting fixtures together. Convenient single outer jacket for speed of rigging while allowing the user to keep cable runs neat and tidy.
These British manufactured cables are finished using nylon braided sleeving over the signal cable tail for maximum durability. Featuring genuine all black Neutrik connectors, the cables are fitted with Neutrik 5-Pin XLR and powerCON TRUE1-TOP connectors. Nylon braided signal cable is secured by adhesive lined heatshrink. The three core 2.5mm power cable is suitable for all lighting applications, and the 110%E2%84%A6 balanced data cable is approved for applications such as RS422, RS485, DMX512, and timecode.
All cables are labelled with their colour length identifier as well as a unique IPS asset ID number. Available in a range of lengths to suit your application – and of course they can also be connected to extend too if needed.
instagrid LINK (3x TRUE1 IN, 3x 16a OUT) 16a MAX Output
Clever single phase mains power processing with the instagrid LINK. Combine with up to three instagrid ONE battery packs to provide additional power, runtime or redundancy. A very effective way to get maximum use from this highly portable battery power system. Perfect for a range of events applications.
The instagrid LINK has 3x TRUE1 power inlets, and 3x 16A CEE Form outlets. It is not supplied as standard with any cables, but we have a wide range of options ready to hire if needed. The unit is designed in a ‘backpack’ style configuration. It attaches to the side rails of an instagred ONE battery pack. There are lots of different ways the link can be used. A runtime extender is one of the most popular uses. With multiple batteries conntected, as soon as one is depleted, the supply seamlessly switches to the next. The ‘flat’ battery can then be swapped out for a freshly charged version, with no interuption to the supplied equipment. This is just one application example. You can find the full technical specifications on the instagrid website here.
Please note that this listing is for a single phase product. If you are looking for three phase, also ready to hire from IPS is the instagrid LINK MAX which uses three instagrid ONE battery packs to create a three phase power supply.
instagrid LINK MAX (3x TRUE1 IN, 1x 16a 3ph OUT) 16a MAX Output 400V AC 11KW
instagrid LINK MAX hire
Portable three phase power from battery packs. Use the instagrid LINK MAX to combine the power of three Instagrid ONE Battery Pack (mk2) units to create one three phase output.
This system offers excellent portability because you can carry all the components by hand. It works perfectly onsite in remote locations or before site power is established. It also suits Staging & Structures projects well, as it can run multiple chain hoists or motors simultaneously.
The units are ready to hire from IPS now. Each Instagrid LINK MAX from IPS comes with three TRUE1 links, along with a 16A 3PH to 32A 3PH adaptor. The TRUE1 link cables are for connecting to the battery units. The 3P adaptor ensures compatibility with our hire stock, as we typically don’t run anything smaller than 32A 3P in our power distribution and cabling range. Please note that the LINK MAX operates only with upgraded Instagrid ONE battery pack units. Almost all our stock has now been upgraded, and we refer to these units as the Instagrid ONE mk2.
Described by the manufacturer as:
Instagrid LINK MAX transforms three Instagrid ONE units into a high-performance 400V, 3-phase power supply. Delivering an impressive 11kW rated output and up to 54kW peak power. Designed for professionals in events, film, live production, and mobile infrastructure. The LINK MAX unlocks applications previously limited to industrial diesel generators — now in a silent, portable format.
Weighing just 5.1kg, the LINK MAX unit can be carried by hand and paired with three Instagrid ONE units to create the world’s most compact and convenient 3-phase power system (total weight: 65kg). It features a plug-and-play design, tool-free setup, and rugged IP54 construction — eliminating the need for noisy engines, cables, or heavy lifting.
Run chain hoists, 400V coffee machines, or entire truss systems with confidence, without the safety risks of extension leads or voltage drops.
Full manufacturer specification on the Instagrid website here.
instagrid ONE Battery Pack (TRUE1 IN, 13a/TRUE1 OUT) MK2
instagrid ONE Battery Pack ready to hire at IPS.
The instagrid ONE is a 2.1kWh battery pack. With a weight of just 20kg it is very portable. It outputs 230 volt mains power at 50Hz via either an onboard 13A or TRUE1 outlet. An IP54 rating means this can be used for indoor and outdoor events. Clever battery and input supply monitoring and switching mean that we keep finding more applications for this versatile unit!
Battery Run time depends on the load being drawn. It is straight forward to calculate if you know the details of your intended load. For example a fixture with a 500W power consumption would run for a little over 4 hours.
Instagrid say:
“There are many mobile battery systems on the market, and they are more or less built the same way: a bank of batteries connected to a central inverter. We do things differently. We break down this central inverter into multiple micro-level inverters, each connected to an individual battery module. Using software and electronics, these modules work together to generate a pure AC sine wave. This innovation is a significant advance in power conversion technology and enables Instagrid products to be drastically smaller, lighter, and more powerful than other battery systems.”
Charging is via a TRUE1 inlet connector, and is complete in around 3 hours.
This listing is for the MK2 version of the proven Instagrid ONE max Battery Pack. It includes all the same features as the previous version, but with additional protection hardware and software to enable the operation with the LINK MAX three phase adaptor unit. Full manufacturers specification here: https://instagrid.co/gb/products/one
More instagrid options
There are additonal backpack units that attach to the instagrid ONE. These include the LINK and LINK MAX, both of which are avaliable to hire from IPS.
The instagrid LINK is a single phase unit that allows up to three instagrid ONE battery packs to be linked together. This either provides 3x the output power (more current, same runtime), or 3x the output capacity (same current, more runtime). The LINK can also be used to allow a mains input to operate the attached load, with the instagrid ONE standing by to take over if the supply fails (and then switch back to mains once power is restored).
The instagrid LINK MAX is a three phase device. It combines three instagrid ONE battery packs to provide a three phase mains supply. Perfect for riggers needing to power electric chain hoists (motors) in remote locations.
JCB G18RS 20kVA Stage V Diesel Generator
JCB G18RS 20kVA Generator Hire
Our smallest Super Silenced Stage V Generator, the JCB G18RS is a rental specific 20kVA super-silent set. It is based around a fully compliant STAGE V (also known as Stage Five or StageV) engine. This means it is a HVO / Diesel Generator powered generator that meets all the latest emissions regulations. The JCB G18RS generator can be configured either as a road towable unit, or skid mounted for HGV transport. The generator has an integral fuel tank as well as the option for an external fuel tank connection. Using the internal tank only, generator run time is approximately 20 to 30 hours.
G18RS generators are the perfect solution for your event energy needs as they come standard with Stage V emissions-compliant engines. This has dramatically reduced particulate and Nox emissions compared to Stage I engines. Not only that, they also contain avmodern fuel-efficient engine. This enables you to save money with minimal fuel consumption and comply with onsite emissions restrictions. G18RS Generators are a smart choice for those looking to reduce their greenhouse gas emissions and leave a smaller carbon footprint. The JCB G18RS noise output is a very low 63dBA @ 7m.
Output Power & Sync Options
The JCB G18RS 20kVA generator has a three phase output delivering approximately 25A per phase (at 230V). There are various power outlet connections onboard. These include 32A 3P, plus a 32A & 16A 1p for easy connections.
Fitted with a simple to use Deep Sea Electronics control panel, the generator has push button start and a range of onboard metering to check the output, fuel and engine status.
JCB G18RS 20kVA StageV Generator – Ready to hire now from IPS
IPS run multiple JCB G18RS 20kVA generators and they can be either collected from our Milton Keynes based warehouse, or we can deliver them to site. They form part of our extensive hire range also including 40kVA and 100kVA StageV Generators. Ready to hire at IPS along with a range of single and three phase power distribution, cable ramp, site lighting. Plus everything else you need for technical event production.
JCB G40RS 40kVA Stage V Diesel Generator
JCB G40RS 40kVA Generator Hire
One of our most popular sets, the JCB G40RS is a rental specific 40kVA super-silent generator. It is based around a fully compliant STAGE V (also known as Stage Five or StageV) engine. This means it is a HVO / Diesel Generator powered generator that meets all the latest emissions regulations. The JCB G40RS generator can be configured either as a road towable unit, or skid mounted for HGV transport. The generator has an integral fuel tank as well as the option for an external fuel tank connection. Using the internal tank only, generator run time is approximately 20 to 30 hours.
G40RS generators are the perfect solution for your event energy needs as they come standard with Stage V emissions-compliant engines. This has dramatically reduced particulate and Nox emissions compared to Stage I engines. Not only that, they also contain avmodern fuel-efficient engine. This enables you to save money with minimal fuel consumption and comply with onsite emissions restrictions. G40RS Generators are a smart choice for those looking to reduce their greenhouse gas emissions and leave a smaller carbon footprint. The JCB G40RS noise output is a very low 67dBA @ 7m.
Output Power & Sync Options
The JCB G40RS 40kVA generator has a three phase output delivering approximately 55A per phase (at 230V). There are plenty of power outlet connections onboard. These include PowerLock, 63A 3P, 32A 3P, plus a 32A & 16A 1p for easy connections.
Due to the advanced Deep Sea Electronics control panel, it can be run as a stand alone set, or multiple sets can be fully synchronised for greater output or redundancy. They can also be configured to run in a redundant backup configuration with one unit active and the other as an automatically starting standby set.
Remote telemetry (and location tracking) hardware is installed within these generators, so operational status and runtimes can be monitored remotely.
JCB G40RS 40kVA StageV Generator – Ready to hire now from IPS
IPS run multiple JCB G40RS 40kVA generators and they can be either collected from our Milton Keynes based warehouse, or we can deliver them to site. They form part of our extensive hire range also including 20kVA and 100kVA StageV Generators. Ready to hire at IPS along with a range of single and three phase power distribution, cable ramp, site lighting. Plus everything else you need for technical event production.
Lug-Lug 120mm Set 10m
This Lug to Lug 120mm Cable Set has been specifically designed with linking between busbars. Often found on generator sets and connection panels, the lug terminals can be bolted secured into place as required. Also called Lug-Lug 120mm Set 10m. If you are looking for plug and play options fitted with PowerLock connectors, IPS have a range of 70mm, 120mm and 240mm cable sets ready to hire in a range of length configurations.
Manufactured with high quality H07 rated cabling and crimped lug connectors, this power cable will provide reliable onsite performance. Each single core cable within the Lug to Lug 120mm Cable Set has a 120mm2 cross sectional area. Each cable measures 10m in overall length. Designed for use with three phase power supplies, the cables are intended for use as Earth (Green), Neutral (Blue), Live 1 (Brown), Live 2 (Black) and Live 3 (Grey) conductors. The colour codes are intended to be used in compliance with the BS7671 harmonised colour codes.
This cable is part of an extensive range of PowerLock and other three phase and single phase cabling ready to hire from IPS. Also ready to hire is an extensive range of power distribution, cable ramp, generators, single and three phase adaptors. And a whole lot more – browse our full hire inventory online here.
MD1-32-1 (to 4x16a, 1x32a 1ph Link)
Input: 32A 1ph
Main Incomer: 32A 2-Pole MCB
Outlets:
4x 16A 1ph
1x 32A 1ph Thru
Breakers:
4x 16A RCBO 30mA
Case Style: K9
MD14-63-3 (to 3x63a 1ph)
Power Inlet: 63A 3ph CEE Form
Overall Isolator: 63A 4-Pole MCB
Outlet Protection: 1x 63A MCB per outlet
Outlets:
3x 63A 1ph
Case Style: PowerPro
MD16-63-3 (to 9x16a, 3x32a 1ph, 1x32a 3ph)
Input: 63A 3ph
Main Incomer: None
Outlets:
9x 16A 1ph
3x 32A 1ph
1x 32A 3ph
Breakers:
9x 16A RCBO 30mA
3x 32A RCBO 30mA
1x 32A 3-Pole MCB
Case Style: Rubber Box
MD17-63-3 (to 1x16a, 3xSoca)
Input: 63A 3ph
Main Incomer: 63A 3-Pole MCB
Outlets:
1x 16A 1ph
3x Socapex, 1ph per outlet
Breakers:
1x 16A RCBO 30mA
3x 63A RCBO 30mA + 6x 16A MCB
Case Style: Rubber Box
MD19-63-3 Type1 (to 1x16a, 1x32a 3ph, 6xSoca)
Input: 63A 3ph
Main Incomer: None
Outlets:
1x 16A 1ph
6x Socapex (3 pairs, 3ph Per Soca)
1x 32A 3ph
Breakers:
1x 16A RCBO 30mA
3x 6x 16A RCBO 30mA
1x 32A 3-Pole MCB
Case Style: PowerPro
MD19-63-3 Type2 (to 1x16a, 1x32a 3ph, 1x63a 3ph Link, 6xSoca)
Input: 63A 3ph
Main Incomer: None
Outlets:
1x 16A 1ph
6x Socapex (3 pairs, 3ph Per Soca)
1x 32A 3ph
1x 63A 3ph Thru
Breakers:
1x 16A RCBO 30mA
3x 6x 16A RCBO 30mA
1x 32A 3-Pole MCB
Case Style: PowerPro
MD2-32-1 (to 4x16a, 1x32a 1ph link)
Input: 32A 1ph
Main Incomer: 32A 2-Pole MCB
Outlets:
4x 16A 1ph
Breakers:
4x 16A RCBO 30mA
Case Style: PowerPro
MD20-63-3 (to 3x16a, 6x32a 1ph)
Input: 63A 3ph
Main Incomer: 63A 4-Pole MCB
Outlets:
3x 16A 1ph
6x 32A 1ph
Breakers:
3x 16A RCBO 30mA
6x 32A RCBO 30mA
Case Style: PowerPro
MD21-63-3 (to 1x16a, 3x32a 3ph)
Input: 63A 3ph
Main Incomer: 63A 4-Pole MCB
Outlets:
1x 16A 1ph
3x 32A 3ph
Breakers:
1x 16A RCBO 30mA
3x 32A 4-Pole MCB
Case Style: PowerPro
MD22-125-3 Type1?FD (to 1x32a 3ph, 2x63a 3ph)
Input: 125A 3ph
Main Incomer: None
Outlets:
1x 32A 3ph
2x 63A 3ph
Breakers:
1x 32A 3-Pole MCB
2x 63A 3-Pole MCB
Case Style: Rubber Box
MD22-125-3 Type2?FD (to 1x32a 3ph, 2x63a 3ph)
Input: 125A 3ph
Main Incomer: 125A 4-Pole MCB
Outlets:
1x 32A 3ph
2x 63A 3ph
Breakers:
1x 32A 4-Pole MCB with Variable RCD
2x 63A 4-Pole MCB with Variable RCD
Case Style: PowerPro
MD23-PL In line Variable RCD
Input: Powerlock
Main Incomer: None
Outlets:
1x 200A Powerlock
Breakers:
1x 200A 4-Pole MCB with Variable RCD
Case Style: PowerPro
MD24-PL (to 1x200a, 1x400a)
Input: Powerlock
Main Incomer: 600A 4-Pole MCCB
Outlets:
1x 200A Powerlock
1x 400A Powerlock
Breakers:
1x 200A 4-Pole MCB with Variable RCD
1x 400A 4-Pole MCB with Variable RCD
Case Style: PowerPro
MD27-PL (to 3x16a, 3x32a 1ph, 2x32a 3ph, 1x63a 3ph, 1x125a 3ph)
Input: Powerlock
Main Incomer: 400A 4-Pole MCCB
Outlets:
3x 16A 1ph
3x 32A 1ph
2x 32A 3ph
1x 63A 3ph
1x 125A 3ph
Breakers:
3x 16A RCBO 30mA
3x 32A RCBO 30mA
2x 32A 4-Pole RCBO 30mA
1x 63A ?
1x 125A 4-Pole MCB with Variable RCD
Case Style: PowerPro
MD28-PL
Input: 3x Powerlock
Outlets:
1x 400A Powerlock
Breakers:
1x 400A 4-Pole MCB with Variable RCD
Case Style: PowerPro
MD29-PL (to 2x13a, 4x16a, 3x32a 1ph, 2x32a 3ph, 1x63a 1ph, 1x63a 3ph, 1x125a 3ph, 3xSoca, 2x200a Link)
Input: Powerlock
Main Incomer: 400A 4-Pole MCCB with Digital Meter
Outlets:
2x 13A 1ph
4x 16A 1ph
3x 32A 1ph
1x 63A 1ph
2x 32A 3ph
1x 63A 3ph
2x 125A 3ph
2x 400A Powerlock Loop Thru
Breakers:
2x 13A RCBO 30mA
4x 16A RCBO 30mA
3x 32A RCBO 30mA
1x 63A MCB + 30mA RCD
2x 32A 3-Pole MCB with Variable RCD
1x 63A 3-Pole MCB with Variable RCD
2x 125A 3-Pole MCB with Variable RCD
Case Style: Flightcase
MD30-PL (to 1x16a, 2x32a 3ph, 3x63a 3ph, 1x125a 3ph, 2x200a Link)
Input: Powerlock
Main Incomer: 400A 4-Pole MCCB with Digital Meter
Outlets:
1x 16A 1ph
2x 32A 3ph
3x 63A 3ph
1x 125A 3ph
2x 200A Powerlock
Breakers:
1x 16A RCBO 30mA
2x 32A 4-Pole MCB with Variable RCD
3x 63A 4-Pole MCB with Variable RCD
1x 125A 4-Pole MCB with Variable RCD
2x 200A 4-Pole MCCB with Variable RCD
Case Style: Wheeled Frame
MD31-PL Type 1 72 Way Soca Hot Power Rack
Input: Powerlock
Main Incomer: 400A 4-Pole MCCB with Digital Meter
Outlets:
3x 13A 1ph
3x 16A 1ph
1x 32A 3ph
1x 63A 3ph
12x Socapex (3ph Per Soca)
1x 400A Powerlock Loop Thru
Breakers:
3x 16A RCBO 30mA
3x 16A RCBO 30mA
1x 32A 3-Pole MCB
1x 63A 3-Pole MCB
12x 6x 16A RCBO 30mA
Case Style: Flightcase
MD31-PL Type 2 72 Way Soca Hot Power Rack
Input: Powerlock
Main Incomer: 400A 4-Pole MCCB with Digital Meter
Outlets:
3x 13A 1ph
3x 16A 1ph
1x 32A 3ph
1x 63A 3ph
12x Socapex (3ph Per Soca)
1x 200A Powerlock Loop Thru
2x USB
Breakers:
3x 13A RCBO 30mA
3x 16A RCBO 30mA
1x 32A 4-Pole MCB with Variable RCD
1x 63A 4-Pole MCB with Variable RCD
12x 6x 16A RCBO 30mA
1x 200A MCCB with Variable RCD
Case Style: Flightcase
MD32-63-3 (to 2x63a 3ph)
Input: 63A 3ph
Main Incomer: 63A 4-Pole MCB
Outlets:
1x 16A 1ph
2x 63A 3ph
Breakers:
1x 16A RCBO 30mA
2x 63A 4-Pole MCB
Case Style: PowerPro
MD33-63-3 (to 18x16a, 6x32a 1ph, 1x32a 3ph, 1x63a 3ph Thru, 3xSoca)
Input: 63A 3ph
Main Incomer: 63A 4-Pole MCB
Outlets:
18x 16A 1ph
3x Socapex, Paired to 16A (3ph Per Soca)
6x 32A 1ph
1x 32A 3ph
1x 63A 3ph Thru
Breakers:
1x 16A RCBO 30mA
18x 16A RCBO 30mA
6x 32A RCBO 30mA
1x 32A 3-Pole MCB
Case Style: PowerPro
MD34-PL (to 6x16a, 1x32a 3ph, 3x125a 3ph, 1x200a)
Input: Powerlock
Main Incomer: 400A 4-Pole MCCB with Digital Meter
Outlets:
6x 16A 1ph
1x 32A 3ph
3x 125A 3ph
1x 200A Powerlock
1x Earth Powerlock Drain
Breakers:
6x 16A RCBO 30mA
1x 32A 4-Pole MCB with Variable RCD
3x 125A 4-Pole MCB with Variable RCD
1x 200A 4-Pole MCCB with Variable RCD
Case Style: Wheeled Frame
MD35-PL (to 6x16a, 6x32a 1ph, 4x32a 3ph, 2x63a 3ph, 2x125a 3ph, 1x200a)
Input: Powerlock
Main Incomer: 400A 4-Pole MCCB with Digital Meter
Outlets:
6x 16A 1ph
6x 32A 1ph
4x 32A 3ph
2x 63A 3ph
2x 125A 3ph
1x 200A Powerlock
Breakers:
6x 16A RCBO 30mA
6x 32A RCBO 30mA
4x 32A 4-Pole MCB with Variable RCD
2x 63A 4-Pole MCB with Variable RCD
2x 125A 4-Pole MCB with Variable RCD
1x 200A 4-Pole MCCB with Variable RCD
Case Style: Wheeled Frame
MD36-125-3 (to 6x16a, 6x32a 1ph, 2x32a 3ph, 2x63a 3ph, 1x125a 3ph link)
Input: 125A 3ph
Main Incomer: 125A 4-Pole MCB
Outlets:
6x 16A 1ph
6x 32A 1ph
2x 32A 3ph
2x 63A 3ph
1x 125A 3ph Thru
Breakers:
6x 16A RCBO 30mA
6x 32A RCBO 30mA
2x 32A 4-Pole MCB with Variable RCD
2x 63A 4-Pole MCB with Variable RCD
Case Style: PowerPro
MD37-63-3 (to 12x16a, 6x32a 1ph, 2x32a 3ph)
Input: 63A 3ph
Main Incomer: 63A 4-Pole MCB
Outlets:
12x 16A 1ph
6x 32A 1ph
2x 32A 3ph
Breakers:
12x 16A RCBO 30mA
6x 32A RCBO 30mA
2x 32A 4-Pole MCB with Variable RCD
Case Style: PowerPro
MD38-PL B-type RCD 300ma (to 4x63a 3ph, 1x125a 3ph, 1xSoca)
MD38-PL B-type RCD 300ma (to 4x63a 3ph, 1x125a 3ph, 1xSoca)
MD40 -32-3 Exhibition 7 Way Modular Frame
Input: 32A 3ph
Main Incomer: None
Outlets:
7x PowerCon
Breakers:
7x 16A RCBO 30mA
Case Style: MCU
MD42-32-3 Exhibition (1x 16a 3ph)
Input: 32A 3ph
Main Incomer: None
Outlets:
1x 16A 3ph
Breakers:
1x 16A 4-Pole MCB
Case Style: In-line
MD43-32-3 Exhibition (1x 16a 1ph)
Input: 32A 3ph
Main Incomer: None
Outlets:
1x 16A 1ph
Breakers:
Available with either 6A, 10A or 16A 1-Pole B Type MCB
Case Style: In-Line
MD44-32-3 Exhibition (2x 16a 1ph)
Input: 32A 3ph
Main Incomer: None
Outlets:
2x 16A 1ph
Breakers:
Available with either 6A, 10A or 16A 1-Pole B Type MCB
Case Style: In-Line
MD45-32-3 Exhibition (1x 32a 1ph)
Input: 32A 3ph
Main Incomer: None
Outlets:
1x 32A 1ph
Breakers:
Available with either 6A, 10A or 16A 1-Pole B Type MCB
Case Style: In-Line
MD5-32-3 (to 6x16a, 1x32a 3ph link)
Input: 32A 3ph
Main Incomer: 32A 4-Pole MCB
Outlets:
6x 16A 1ph
1x 32A 3ph Thru
Breakers:
6x 16A RCBO 30mA
Case Style: K9
MD51-32-3 In Line Variable RCD
Input: 32A 3ph
Outlets:
1x 32A 3ph
Breakers:
32A 4-Pole MCB
Variable RCD
Case Style: PowerPro
MD52-63-3 In Line Variable RCD
Input: 63A 3ph
Main Incomer: None
Outlets:
1x 63A 3ph
Breakers:
1x 63A 4-Pole MCB with Variable RCD
Case Style: PowerPro
MD53-125-3 In Line Variable RCD
Input: 125A 3ph
Main Incomer: None
Outlets:
1x 125A 3ph
Breakers:
1x 125A 4-Pole MCB with Variable RCD
Case Style: PowerPro
MD59-16-16 In Line RCD
Input: 16A 1ph
Main Incomer: None
Outlets:
1x 16A 1ph
Breakers:
1x 30mA RCD
Case Style: In-Line
MD6-32-3 (to 3x32a 1ph, 1x32a 3ph link)
Input: 32A 3ph
Main Incomer: 32A 4-Pole MCB
Outlets:
3x 32A 1ph
1x 32A 3ph Thru
Breakers:
3x 32A RCBO 30mA
Case Style: K9
MD7-32-3 (to 6x16a, 3x32a 1ph, 1x32a 3ph link)
Input: 32A 3ph
Main Incomer: 32A 4-Pole MCB
Outlets:
6x 16A 1ph
3x 32A 1ph
1x 32A 3ph Thru
Breakers:
6x 16A RCBO 30mA
3x 32A RCBO 30mA
Case Style: PowerPro
MD9-63-1 (to 6x16a, 2x32a 1ph)
Input: 63A 1ph
Main Incomer: 63A MCB
Outlets:
2x 32A 1ph
6x 16A 1ph
Breakers:
2x 32A RCBO 30mA
6x 16A RCBO 30mA
Case Style: Rubber Box
PowerLock 120mm Set 10m
PowerLock 120mm Set 10m
Perfect for event power distribution, this set consists of five individual PowerLock terminated cables. In Male to Female or Source to Drain connector configuration, this cable set could be considered an extension. Multiple sets can physically be joined together if longer lengths are needed.
Manufactured with high quality H07 rated cabling and PowerLock connectors, this power cable will provide reliable onsite performance. Each single core cable within the set has a 120mm2 cross sectional area. Each cable measures 10m in overall length. Designed for use with three phase power supplies, the cables are intended for use as Earth (Green), Neutral (Blue), Live 1 (Brown), Live 2 (Black) and Live 3 (Grey) conductors. The colour codes are intended to be used in compliance with the BS7671 harmonised colour codes.
PowerLock cable sets are perfect for higher current runs, such as the incomer from a generator or main power supply. They are also ideal for site power distribution. The large cross sectional area of the conductors within the cable means that large electrical currents can be carried. They also offer a lower voltage drop than a smaller diameter cable. Powerlock sets can be easier to handle than large single cables as each cable is run individually rather than as one big lump.
PowerLock 120mm Set 10m is just one of a large range of three phase power cable hire options from IPS. The hire stock also includes a wide range of adapters, cable ramp and power distribution options.
More PowerLock Hire Options
The full range of 120mm sets for hire from IPS include:
Plus we also stock PowerLock in 70mm, 150mm and 240mm options too.
PowerLock 120mm Set 15m
PowerLock 120mm Set 15m
Perfect for event power distribution, this set consists of five individual PowerLock terminated cables. In Male to Female or Source to Drain connector configuration, this cable set could be considered an extension. Multiple sets can physically be joined together if longer lengths are needed.
Manufactured with high quality H07 rated cabling and PowerLock connectors, this power cable will provide reliable onsite performance. Each single core cable within the set has a 120mm2 cross sectional area. Each cable measures 15m in overall length. Designed for use with three phase power supplies, the cables are intended for use as Earth (Green), Neutral (Blue), Live 1 (Brown), Live 2 (Black) and Live 3 (Grey) conductors. The colour codes are intended to be used in compliance with the BS7671 harmonised colour codes.
PowerLock cable sets are perfect for higher current runs, such as the incomer from a generator or main power supply. They are also ideal for site power distribution. The large cross sectional area of the conductors within the cable means that large electrical currents can be carried. They also offer a lower voltage drop than a smaller diameter cable. Powerlock sets can be easier to handle than large single cables as each cable is run individually rather than as one big lump.
PowerLock 120mm Set 15m is just one of a large range of three phase power cable hire options from IPS. The hire stock also includes a wide range of adapters, cable ramp and power distribution options.
More PowerLock Hire Options
The full range of 120mm sets for hire from IPS include:
Plus we also stock PowerLock in 70mm, 150mm and 240mm options too.
PowerLock 120mm Set 25m
PowerLock 120mm Set 25m
Perfect for event power distribution, this set consists of five individual PowerLock terminated cables. In Male to Female or Source to Drain connector configuration, this cable set could be considered an extension. Multiple sets can physically be joined together if longer lengths are needed.
Manufactured with high quality H07 rated cabling and PowerLock connectors, this power cable will provide reliable onsite performance. Each single core cable within the set has a 120mm2 cross sectional area. Each cable measures 25m in overall length. Designed for use with three phase power supplies, the cables are intended for use as Earth (Green), Neutral (Blue), Live 1 (Brown), Live 2 (Black) and Live 3 (Grey) conductors. The colour codes are intended to be used in compliance with the BS7671 harmonised colour codes.
PowerLock cable sets are perfect for higher current runs, such as the incomer from a generator or main power supply. They are also ideal for site power distribution. The large cross sectional area of the conductors within the cable means that large electrical currents can be carried. They also offer a lower voltage drop than a smaller diameter cable. Powerlock sets can be easier to handle than large single cables as each cable is run individually rather than as one big lump.
PowerLock 120mm Set 25m is just one of a large range of three phase power cable hire options from IPS. The hire stock also includes a wide range of adapters, cable ramp and power distribution options.
More PowerLock Hire Options
The full range of 120mm sets for hire from IPS include:
Plus we also stock PowerLock in 70mm, 150mm and 240mm options too.
PowerLock 120mm Set 2m
PowerLock 120mm Set 2m
Perfect for event power distribution, this set consists of five individual PowerLock terminated cables. At 2m long, this is our shortest stock 120mm PowerLock cable set, and usually used for patching between racks or distribution units. In Male to Female or Source to Drain connector configuration, this cable set could be considered an extension. Multiple sets can physically be joined together if longer lengths are needed.
Manufactured with high quality H07 rated cabling and PowerLock connectors, this power cable will provide reliable onsite performance. Each single core cable within the set has a 120mm2 cross sectional area. Each cable measures 2m in overall length. Designed for use with three phase power supplies, the cables are intended for use as Earth (Green), Neutral (Blue), Live 1 (Brown), Live 2 (Black) and Live 3 (Grey) conductors. The colour codes are intended to be used in compliance with the BS7671 harmonised colour codes.
PowerLock cable sets are perfect for higher current runs, such as the incomer from a generator or main power supply. They are also ideal for site power distribution. The large cross sectional area of the conductors within the cable means that large electrical currents can be carried. They also offer a lower voltage drop than a smaller diameter cable. Powerlock sets can be easier to handle than large single cables as each cable is run individually rather than as one big lump.
PowerLock 120mm Set 2m is just one of a large range of three phase power cable hire options from IPS. The hire stock also includes a wide range of adapters, cable ramp and power distribution options.
More PowerLock Hire Options
The full range of 120mm sets for hire from IPS include:
Plus we also stock PowerLock in 70mm, 150mm and 240mm options too.
PowerLock 120mm Set 30m
PowerLock 120mm Set 30m
Perfect for event power distribution, this set consists of five individual PowerLock terminated cables. In Male to Female or Source to Drain connector configuration, this cable set could be considered an extension. Multiple sets can physically be joined together if longer lengths are needed.
Manufactured with high quality H07 rated cabling and PowerLock connectors, this power cable will provide reliable onsite performance. Each single core cable within the set has a 120mm2 cross sectional area. Each cable measures 30m in overall length. Designed for use with three phase power supplies, the cables are intended for use as Earth (Green), Neutral (Blue), Live 1 (Brown), Live 2 (Black) and Live 3 (Grey) conductors. The colour codes are intended to be used in compliance with the BS7671 harmonised colour codes.
PowerLock cable sets are perfect for higher current runs, such as the incomer from a generator or main power supply. They are also ideal for site power distribution. The large cross sectional area of the conductors within the cable means that large electrical currents can be carried. They also offer a lower voltage drop than a smaller diameter cable. Powerlock sets can be easier to handle than large single cables as each cable is run individually rather than as one big lump.
PowerLock 120mm Set 30m is just one of a large range of three phase power cable hire options from IPS. The hire stock also includes a wide range of adapters, cable ramp and power distribution options.
PowerLock 120mm Set 50m
PowerLock 120mm Set 50m
Perfect for event power distribution, this set consists of five individual PowerLock terminated cables. In Male to Female or Source to Drain connector configuration, this cable set could be considered an extension. Multiple sets can physically be joined together if longer lengths are needed.
Manufactured with high quality H07 rated cabling and PowerLock connectors, this power cable will provide reliable onsite performance. Each single core cable within the set has a 120mm2 cross sectional area. Each cable measures 50m in overall length. Designed for use with three phase power supplies, the cables are intended for use as Earth (Green), Neutral (Blue), Live 1 (Brown), Live 2 (Black) and Live 3 (Grey) conductors. The colour codes are intended to be used in compliance with the BS7671 harmonised colour codes.
PowerLock cable sets are perfect for higher current runs, such as the incomer from a generator or main power supply. They are also ideal for site power distribution. The large cross sectional area of the conductors within the cable means that large electrical currents can be carried. They also offer a lower voltage drop than a smaller diameter cable. Powerlock sets can be easier to handle than large single cables as each cable is run individually rather than as one big lump.
PowerLock 120mm Set 50m is just one of a large range of three phase power cable hire options from IPS. The hire stock also includes a wide range of adapters, cable ramp and power distribution options.
PowerLock 120mm Set 5m
PowerLock 120mm Set 5m
Perfect for event power distribution, this set consists of five individual PowerLock terminated cables. In Male to Female or Source to Drain connector configuration, this cable set could be considered an extension. Multiple sets can physically be joined together if longer lengths are needed.
Manufactured with high quality H07 rated cabling and PowerLock connectors, this power cable will provide reliable onsite performance. Each single core cable within the set has a 120mm2 cross sectional area. Each cable measures 5m in overall length. Designed for use with three phase power supplies, the cables are intended for use as Earth (Green), Neutral (Blue), Live 1 (Brown), Live 2 (Black) and Live 3 (Grey) conductors. The colour codes are intended to be used in compliance with the BS7671 harmonised colour codes.
PowerLock cable sets are perfect for higher current runs, such as the incomer from a generator or main power supply. They are also ideal for site power distribution. The large cross sectional area of the conductors within the cable means that large electrical currents can be carried. They also offer a lower voltage drop than a smaller diameter cable. Powerlock sets can be easier to handle than large single cables as each cable is run individually rather than as one big lump.
PowerLock 120mm Set 5m is just one of a large range of three phase power cable hire options from IPS. The hire stock also includes a wide range of adapters, cable ramp and power distribution options.
More PowerLock Hire Options
The full range of 120mm sets for hire from IPS include:
Plus we also stock PowerLock in 70mm, 150mm and 240mm options too.
PowerLock 150mm Male to Male Link Set 7.5m
PowerLock 150mm Male to Male Link Set 7.5m
Manufactured with high quality H07 rated cabling and PowerLock connectors, this power cable will provide reliable onsite performance. Each single core cable within the set has a 150mm2 cross sectional area. Each cable measures 7.5m in overall length. Designed for use with three phase power supplies, the cables are intended for use as Earth (Green), Neutral (Blue), Live 1 (Brown), Live 2 (Black) and Live 3 (Grey) conductors. The colour codes are intended to be used in compliance with the BS7671 harmonised colour codes. Please note that this link set has male connectors on both ends and is only for use for specific applications.
This cable set has been specifically designed with linking generators in mind. An ideal length to connect between multiple IPS BGG 100kVA Ultra Silent Generators. The PowerLock Male to Male Link Set helps make easy work of establishing a synchronised supply.
This cable is part of an extensive range of PowerLock and other three phase and single phase cabling ready to hire from IPS. Also ready to hire is an extensive range of power distribution, cable ramp, generators – and a whole lot more. Browse our full hire inventory online here.
PowerLock 240mm Set 10m
PowerLock 240mm Cable Set 10m
Currently 240mm2 is the highest current rated cable in the IPS hire stock. Perfect for event power distribution, this set consists of five individual PowerLock terminated cables. In Male to Female or Source to Drain connector configuration, this cable set could be considered an extension. Multiple sets can physically be joined together if longer lengths are needed.
Manufactured with high quality H07 rated cabling and PowerLock connectors. Each single core cable within the set has a 240mm2 cross sectional area. Each cable measures 10m in overall length. Designed for use with three phase power supplies, the cables are intended for use as Earth (Green), Neutral (Blue), Live 1 (Brown), Live 2 (Black) and Live 3 (Grey) conductors. The colour codes are intended to be used in compliance with the BS7671 harmonised colour codes.
PowerLock cable sets are perfect for higher current runs, such as the incomer from a generator or main power supply. They are also ideal for site power distribution. The large cross sectional area of the conductors within the cable means that large electrical currents can be carried. They also offer a lower voltage drop than a smaller diameter cable. Powerlock sets can be easier to handle than large single cables as each cable is run individually rather than as one big lump.
PowerLock 240mm Cable Set 10m is just one of a large range of three phase power cable hire options from IPS. The hire stock also includes a wide range of adapters, cable ramp and power distribution options.
PowerLock 240mm Set 25m
PowerLock 240mm Cable Set 25m
Currently 240mm2 is the highest current rated cable in the IPS hire stock. Perfect for event power distribution, this set consists of five individual PowerLock terminated cables. In Male to Female or Source to Drain connector configuration, this cable set could be considered an extension. Multiple sets can physically be joined together if longer lengths are needed.
Manufactured with high quality H07 rated cabling and PowerLock connectors. Each single core cable within the set has a 240mm2 cross sectional area. Each cable measures 25m in overall length. Designed for use with three phase power supplies, the cables are intended for use as Earth (Green), Neutral (Blue), Live 1 (Brown), Live 2 (Black) and Live 3 (Grey) conductors. The colour codes are intended to be used in compliance with the BS7671 harmonised colour codes.
PowerLock cable sets are perfect for higher current runs, such as the incomer from a generator or main power supply. They are also ideal for site power distribution. The large cross sectional area of the conductors within the cable means that large electrical currents can be carried. They also offer a lower voltage drop than a smaller diameter cable. Powerlock sets can be easier to handle than large single cables as each cable is run individually rather than as one big lump.
PowerLock 240mm Cable Set 25m is just one of a large range of three phase power cable hire options from IPS. The hire stock also includes a wide range of adapters, cable ramp and power distribution options.
PowerLock 240mm Set 2m
PowerLock 240mm Cable Set 2m
Currently 240mm2 is the highest current rated cable in the IPS hire stock. Perfect for event power distribution, this set consists of five individual PowerLock terminated cables. In Male to Female or Source to Drain connector configuration, this cable set could be considered an extension. Multiple sets can physically be joined together if longer lengths are needed, but this short 2m set is ideal for linking between distribution units.
Manufactured with high quality H07 rated cabling and PowerLock connectors. Each single core cable within the set has a 240mm2 cross sectional area. Each cable measures 2m in overall length. Designed for use with three phase power supplies, the cables are intended for use as Earth (Green), Neutral (Blue), Live 1 (Brown), Live 2 (Black) and Live 3 (Grey) conductors. The colour codes are intended to be used in compliance with the BS7671 harmonised colour codes.
PowerLock cable sets are perfect for higher current runs, such as the incomer from a generator or main power supply. They are also ideal for site power distribution. The large cross sectional area of the conductors within the cable means that large electrical currents can be carried. They also offer a lower voltage drop than a smaller diameter cable. Powerlock sets can be easier to handle than large single cables as each cable is run individually rather than as one big lump.
PowerLock 240mm Cable Set 2m is just one of a large range of three phase power cable hire options from IPS. The hire stock also includes a wide range of adapters, cable ramp and power distribution options.
PowerLock 240mm Set 5m
PowerLock 240mm Cable Set 5m
The PowerLock 240mm Cable Set 5m is the highest current rated cable type in the IPS hire stock. Perfect for event power distribution, this set consists of five individual PowerLock terminated cables. In Male to Female or Source to Drain connector configuration, this cable set could be considered an extension. Multiple sets can physically be joined together if longer lengths are needed.
Manufactured with high quality H07 rated cabling and PowerLock connectors. Each single core cable within the set has a 240mm2 cross sectional area. Each cable measures 5m in overall length. Designed for use with three phase power supplies, the cables are intended for use as Earth (Green), Neutral (Blue), Live 1 (Brown), Live 2 (Black) and Live 3 (Grey) conductors. The colour codes are intended to be used in compliance with the BS7671 harmonised colour codes.
PowerLock cable sets are perfect for higher current runs, such as the incomer from a generator or main power supply. They are also ideal for site power distribution. The large cross sectional area of the conductors within the cable means that large electrical currents can be carried. They also offer a lower voltage drop than a smaller diameter cable. Powerlock sets can be easier to handle than large single cables as each cable is run individually rather than as one big lump.
PowerLock 240mm Cable Set 5m is just one of a large range of three phase power cable hire options from IPS. The hire stock also includes a wide range of adapters, cable ramp and power distribution options.
Stephill SSD6000S 6kva Super Silenced Generator
Stephill 6kVA Generator Hire
Looking for a compact, reliable power source for your next event? Introducing Stephill 6kVA Generator Hire from IPS. The Stephill 6kVA Super Silent Generator is a versatile single-phase unit, ideal for smaller setups or remote locations where power access is limited. Operating at 3000rpm and powered by HVO or diesel, this generator delivers up to 21A at 230V via 16A and 32A outlet connectors, making it easy to integrate into all standard event power systems.
Key Features:
- Single-phase output with 16A & 32A connectors (max 21A)
- Super silent canopy for low-noise operation
- Wheeled trolley design for easy transport and deployment
- Electric start for quick and simple activation
- Up to 17 hours runtime on a full tank of HVO fuel (dependant on load)
- Supplied with earth stake and 3m earth bond for safe compliant setup onsite
This generator is the smallest in our hire range, making it perfect for smaller events. It is equally at home reducing cable runs or powering isolated areas at larger events. Its barrow-style frame allows it to be wheeled into a van via ramp, ensuring hassle-free transport and setup.
Unlike open-frame alternatives, the Stephill 6kVA features a fully enclosed, super-silenced canopy. This offers a significant upgrade in noise reduction and durability. Compact and built for professional event use, the Stephill 6kVA Generator is a consistently a popular choice among event organisers for its ease of use and rapid deployment.
IPS supplies each unit fully fuelled and ready to run, with multiple sets available for immediate hire. Based in Milton Keynes, IPS is a trusted supplier to the UK event industry, offering a wide range of power solutions equipment including mains distribution, cable ramps, power cabling and much more.
Explore our full trade hire generator range, plus all kinds of event power accessories here: https://www.ips.co.uk/trade-hire/power
Transcube 2000L Bunded Fuel Tank
The 2000 litre Transcube Bunded Fuel Tank has been designed to transport and dispense fuel precisely when and where you need it.
Features include all steel construction with Steel outer and inner bunds, Lockable cover, Baffled inner tank for safer transportation when full of fuel plus Removable inspection hatch for easy maintenance and inspection.
Fitted with lifting eyes and forklift pockets for easy movement and handling. Stackable (up to three high empty or two high when full)
Transcube 910L Bunded Fuel Tank
The 910 litre Transcube Bunded Fuel Tank has been designed to transport and dispense fuel precisely when and where you need it.
Features include all steel construction with Steel outer and inner bunds, Lockable cover, Baffled inner tank for safer transportation when full of fuel plus Removable inspection hatch for easy maintenance and inspection.
Fitted with lifting eyes and forklift pockets for easy movement and handling. Stackable (up to three high empty or two high when full)
