3pin 12v Birdie Cable 3m

3pin 12v Birdie Cable 5m

3pin DMX Terminator

3pin DMX Cable 3m

3pin DMX Cable 5m

3pin DMX Cable 10m

3pin DMX Cable 20m

3pin DMX Cable 30m

4pin XLR Cable 1m

4pin XLR Cable 1.5m

4pin XLR Cable 3m

4pin XLR Cable 5m

4pin XLR Cable 10m

20m Lighting Feeder Loom 5x Socapex 1.5mm & 4x 5pin DMX

30m Lighting Feeder Loom 5x Socapex 1.5mm & 4x 5pin DMX

50m Lighting Control Loom 2x TourCat, 1x 16a

50m Lighting Control Multicore

100m Lighting Control Multicore – 4x 5pin DMX + 2x Tour Cat + 1x XLR + 1x 16a 1ph

150m Fibre Lighting Control Multicore

Sceptron 4pin M – BBD F 0.25m Input Adaptor

Also available to purchase ex-hire.
Get in touch to discuss package pricing.

Sceptron 4pin M + 5pin M – 4pin F Input Adaptor

Also available to purchase ex-hire.
Get in touch to discuss package pricing.

Also available to purchase ex-hire.
Get in touch to discuss package pricing.

Also available to purchase ex-hire.
Get in touch to discuss package pricing.

Also available to purchase ex-hire.
Get in touch to discuss package pricing.

Sceptron BBD – BBD Cable 25m

Sneak Snake Fan IN 

Send up to four universes of DMX down a CAT network cable using the SneakSnake system made by TMB. This listing is for the Sneak Snake 4-Uni Fan IN adaptor (also sometimes called a break in). This is typically applied at the input / desk end of the system, and the fan in is fitted with male 5pin XLR connectors. Reliable black finish Neutrik connectors are used within this product.

The four different universes within the adaptor are identified with colour coded cable boots on the adaptor. The four colours used are Red, Brown, Orange & Yellow. IPS also stock the matching Sneak Snake 4-Uni Fan OUT adaptor for the other end of this system. IPS also have a wide range of network cables suitable for use with this system – check out the hire list here.

The SneakSnake Cable System

Designed so users can “Sneak” up to four DMX universes over economical CAT cable! The SneakSnake is very quick to deploy. It can be used with any sheilded CAT5 (or better) cable with RJ45 etherCON connectors. It is an economical system to integrate as there are no expensive specialised connectors. All the parts will be familiar and already found on almost all show setups.

Completely passive system, so no power needed at either end. Please note that this is a pin adaptor based system and NOT an IP / Network Protocol system. This means that whilst it uses standard network cable, it can’t be used with other network items such as systems or other control systems. It must be cabled point to point, from one SneakSnake compatible adaptor or panel to another. This does mean that there is no software configuration or assignment – just plug it in and it is ready to go. As network cables are bi-directional, it also means that there can’t be a wrong end at FOH if someone has not been paying attention. Worst case, you only have to swap the fan in/out adaptors!

Full manufacturer specification can be found here.

Sneak Snake Fan OUT

Send up to four universes of DMX down a CAT network cable using the SneakSnake system made by TMB. This listing is for the Sneak Snake 4-Uni Fan OUT adaptor (also sometimes called a break out). This is typically applied at the output end of the system, and the fan out is fitted with female 5pin XLR connectors. Reliable black finish Neutrik connectors are used within this product.

The four different universes within the adaptor are identified with colour coded cable boots on the adaptor. The four colours used are Red, Brown, Orange & Yellow. IPS also stock the matching Sneak Snake 4-Uni Fan IN adaptor for the other end of this system. IPS also have a wide range of network cables suitable for use with this system – check out the hire list here.

The SneakSnake Cable System

Designed so users can “Sneak” up to four DMX universes over economical CAT cable! The SneakSnake is very quick to deploy. It can be used with any sheilded CAT5 (or better) cable with RJ45 etherCON connectors. It is an economical system to integrate as there are no expensive specialised connectors. All the parts will be familiar and already found on almost all show setups.

Completely passive system, so no power needed at either end. Please note that this is a pin adaptor based system and NOT an IP / Network Protocol system. This means that whilst it uses standard network cable, it can’t be used with other network items such as systems or other control systems. It must be cabled point to point, from one SneakSnake compatible adaptor or panel to another. This does mean that there is no software configuration or assignment – just plug it in and it is ready to go. As network cables are bi-directional, it also means that there can’t be a wrong end at FOH if someone has not been paying attention. Worst case, you only have to swap the fan in/out adaptors!

Full manufacturer specification can be found here.

5pin DMX 5 Core Cable 10m

5pin DMX 5 Core Cable 15m

5pin – 3pin IP Rated DMX Cable Adaptor

3pin – 5pin IP Rated DMX Cable Adaptor

5pin DMX IP Rated Cable 1.5m

5pin DMX IP Rated Cable 3m

5pin DMX IP Rated Cable 5m

5pin DMX IP Rated Cable 10m

5pin DMX IP Rated Cable 15m

5pin DMX IP Rated Cable 20m

5pin DMX IP Rated Cable 30m

100m IP Rated 5pin DMX Cable On Drum

5pin DMX Terminator

3pin – 5pin DMX Cable Adaptor

5pin DMX Cable 1.5m

5pin DMX Cable 3m

5pin DMX Cable 5m

5pin DMX Cable 10m

5pin DMX Cable 15m

5pin DMX Cable 20m

5pin DMX Cable 30m

5pin DMX Cable 40m

5pin DMX Cable 50m

Hybrid multicore DMX signal plus power cables for linking lighting fixtures together. Convenient single outer jacket for speed of rigging while allowing the user to keep cable runs neat and tidy.

These British manufactured cables are finished using nylon braided sleeving over the signal cable tail for maximum durability. Featuring genuine all black Neutrik connectors, the cables are fitted with Neutrik 5-Pin XLR and powerCON TRUE1-TOP connectors. Nylon braided signal cable is secured by adhesive lined heatshrink. The three core 2.5mm power cable is suitable for all lighting applications, and the 110%E2%84%A6 balanced data cable is approved for applications such as RS422, RS485, DMX512, and timecode.

All cables are labelled with their colour length identifier as well as a unique IPS asset ID number. Available in a range of lengths to suit your application – and of course they can also be connected to extend too if needed.

Hybrid multicore DMX signal plus power cables for linking lighting fixtures together. Convenient single outer jacket for speed of rigging while allowing the user to keep cable runs neat and tidy.

These British manufactured cables are finished using nylon braided sleeving over the signal cable tail for maximum durability. Featuring genuine all black Neutrik connectors, the cables are fitted with Neutrik 5-Pin XLR and powerCON TRUE1-TOP connectors. Nylon braided signal cable is secured by adhesive lined heatshrink. The three core 2.5mm power cable is suitable for all lighting applications, and the 110%E2%84%A6 balanced data cable is approved for applications such as RS422, RS485, DMX512, and timecode.

All cables are labelled with their colour length identifier as well as a unique IPS asset ID number. Available in a range of lengths to suit your application – and of course they can also be connected to extend too if needed.

Hybrid multicore DMX signal plus power cables for linking lighting fixtures together. Convenient single outer jacket for speed of rigging while allowing the user to keep cable runs neat and tidy.

These British manufactured cables are finished using nylon braided sleeving over the signal cable tail for maximum durability. Featuring genuine all black Neutrik connectors, the cables are fitted with Neutrik 5-Pin XLR and powerCON TRUE1-TOP connectors. Nylon braided signal cable is secured by adhesive lined heatshrink. The three core 2.5mm power cable is suitable for all lighting applications, and the 110%E2%84%A6 balanced data cable is approved for applications such as RS422, RS485, DMX512, and timecode.

All cables are labelled with their colour length identifier as well as a unique IPS asset ID number. Available in a range of lengths to suit your application – and of course they can also be connected to extend too if needed.

Hybrid multicore DMX signal plus power cables for linking lighting fixtures together. Convenient single outer jacket for speed of rigging while allowing the user to keep cable runs neat and tidy.

These British manufactured cables are finished using nylon braided sleeving over the signal cable tail for maximum durability. Featuring genuine all black Neutrik connectors, the cables are fitted with Neutrik 5-Pin XLR and powerCON TRUE1-TOP connectors. Nylon braided signal cable is secured by adhesive lined heatshrink. The three core 2.5mm power cable is suitable for all lighting applications, and the 110%E2%84%A6 balanced data cable is approved for applications such as RS422, RS485, DMX512, and timecode.

All cables are labelled with their colour length identifier as well as a unique IPS asset ID number. Available in a range of lengths to suit your application – and of course they can also be connected to extend too if needed.

Hybrid multicore DMX signal plus power cables for linking lighting fixtures together. Convenient single outer jacket for speed of rigging while allowing the user to keep cable runs neat and tidy.

These British manufactured cables are finished using nylon braided sleeving over the signal cable tail for maximum durability. Featuring genuine all black Neutrik connectors, the cables are fitted with Neutrik 5-Pin XLR and powerCON TRUE1-TOP connectors. Nylon braided signal cable is secured by adhesive lined heatshrink. The three core 2.5mm power cable is suitable for all lighting applications, and the 110%E2%84%A6 balanced data cable is approved for applications such as RS422, RS485, DMX512, and timecode.

All cables are labelled with their colour length identifier as well as a unique IPS asset ID number. Available in a range of lengths to suit your application – and of course they can also be connected to extend too if needed.

Hybrid multicore DMX signal plus power cables for linking lighting fixtures together. Convenient single outer jacket for speed of rigging while allowing the user to keep cable runs neat and tidy.

These British manufactured cables are finished using nylon braided sleeving over the signal cable tail for maximum durability. Featuring genuine all black Neutrik connectors, the cables are fitted with Neutrik 5-Pin XLR and powerCON TRUE1-TOP connectors. Nylon braided signal cable is secured by adhesive lined heatshrink. The three core 2.5mm power cable is suitable for all lighting applications, and the 110%E2%84%A6 balanced data cable is approved for applications such as RS422, RS485, DMX512, and timecode.

All cables are labelled with their colour length identifier as well as a unique IPS asset ID number. Available in a range of lengths to suit your application – and of course they can also be connected to extend too if needed.

Hybrid multicore DMX signal plus power cables for linking lighting fixtures together. Convenient single outer jacket for speed of rigging while allowing the user to keep cable runs neat and tidy.

These British manufactured cables are finished using nylon braided sleeving over the signal cable tail for maximum durability. Featuring genuine all black Neutrik connectors, the cables are fitted with Neutrik 5-Pin XLR and powerCON TRUE1-TOP connectors. Nylon braided signal cable is secured by adhesive lined heatshrink. The three core 2.5mm power cable is suitable for all lighting applications, and the 110%E2%84%A6 balanced data cable is approved for applications such as RS422, RS485, DMX512, and timecode.

All cables are labelled with their colour length identifier as well as a unique IPS asset ID number. Available in a range of lengths to suit your application – and of course they can also be connected to extend too if needed.

Hybrid multicore DMX signal plus power cables for linking lighting fixtures together. Convenient single outer jacket for speed of rigging while allowing the user to keep cable runs neat and tidy.

These British manufactured cables are finished using nylon braided sleeving over the signal cable tail for maximum durability. Featuring genuine all black Neutrik connectors, the cables are fitted with Neutrik 5-Pin XLR and powerCON TRUE1-TOP connectors. Nylon braided signal cable is secured by adhesive lined heatshrink. The three core 2.5mm power cable is suitable for all lighting applications, and the 110%E2%84%A6 balanced data cable is approved for applications such as RS422, RS485, DMX512, and timecode.

All cables are labelled with their colour length identifier as well as a unique IPS asset ID number. Available in a range of lengths to suit your application – and of course they can also be connected to extend too if needed.

Sneak Snake Panel
Send up to four universes of DMX down a CAT network cable using the SneakSnake system made by TMB. This listing is for the Sneak Snake Panel. This is a smart 1U rack mounted panel populated with both male and female 5pin XLR connectors. The male and female connectors are connected in parallel, so only one should be used at a time. This means the SneakSnake Panel is bi-directional and could be used at either an input or output end of a system. It is most found built into an Art-Net stage output rack to simplify truss cable runs.
IPS also stock the matching Sneak Snake 4-Uni Fan IN and Sneak Snake 4-Uni Fan OUT adaptors for the other end of this system. IPS also have a wide range of network cables suitable for use with this system – check out the hire list here. Alternatively, any shielded CAT 5 cable can be used (so this means it will need etherCON or another form of connector with a connected shield conductor present).

The SneakSnake Cable System
Designed so users can %E2%80%9CSneak%E2%80%9D up to four DMX universes over economical CAT cable! The SneakSnake is very quick to deploy. It can be used with any CAT5 (or better) cable with RJ45 etherCON connectors. It is an economical system to integrate as there are no expensive specialised connectors. All the parts will be familiar and already found on almost all show setups.
Completely passive system, so no power needed at either end. Please note that this is a pin adaptor-based system and NOT an IP / Network Protocol system. This means that whilst it uses standard network cable, it can’t be used with other network items such as systems or other control systems. It must be cabled point to point, from one SneakSnake compatible adaptor or panel to another. This does mean that there is no software configuration or assignment – just plug it in and it is ready to go. As network cables are bi-directional, it also means that there can’t be a wrong end at FOH if someone has not been paying attention. Worst case, you only need to swap the fan in/out adaptors!