Description
4ch Motor Controller Direct Control 32a 3ph Inlet
4ch Motor Controller Direct Control 32a 3ph Inlet
£34.50
Per Week
QTY:
4ch Motor Controller Direct Control 32a 3ph Inlet
£34.50
Per Week
QTY:
Related Products
EXE Rise D8+ 2000kg 33m HOL Double Reeve Motor LV
EXE Rise D8+ 2000kg 33m Height of Lift (HOL) Double Reeve Motor with Low Voltage (LV) control
The EXE Rise D8+ 2000kg Double Reeve Motor / chain hoist is ready to hire now from IPS. Electric Chain Hoists (or ‘Motors’ as they are also commonly known) are an ideal choice for event rigging. Hirers can use these three-phase powered models on their own via a 1-way controller (or pickle) or in multi-hoist configurations. Featuring low voltage control (LV) these motors are widely compatible with a range of control systems. Double braked, and compliant with D8+ standards, these hoists meet all rider specification criteria for event and entertainment projects.
The EXE Rise range is made from extremely light cast aluminium. This monster two ton model has a relatively small body size for the capacity – officially named ‘Large Frame’ in EXE terminology. This means our versions are much smaller than the single drop chain versions from other suppliers. The IPS hire stock versions tip the scales at 215kg including the chain. Speaking of chains, the IPS hire stock 2000kg EXE Rise motors feature a lenghty 33m Height of Lift. This makes these work well in higher venues as a straight drop – and comfortably work in a motor down configuration for a ground support for towers up to 15m tall (just remember double reeve means double runners needed on the header).
Designed for smooth operation, the EXE Rise electric chain hoist operates at a fixed speed of 4 metres per minute. Comparatively quiet in operation, these motors are ideal for soundstages, nightclubs, exhibition halls, concert halls, amphitheatres, and all kinds of indoor or outdoor venues. Check out the full manufacturer specification here.
Rigging ready to hire – and ready to use
Packaged in a tour ready wheeled flight case, our EXE Rise D8+ 2000kg Motors are ready to go. Ask us about the hire of optional rain covers if you are working outside. Supplied ready to rig with the chain run out, each motor has up-to-date LOLER and electrical test certificates available for the hire duration.
We also have a wide range of other Chain Hoist options including 500kg and 1000kg models. In stock now alongside 1 to 32 way control systems, motor power and control cable looms. Plus a huge selection of other event rigging hardware. Check out the full range of motors and control options ready to hire from IPS here.
EXE Rise D8+ 1000kg 25m HOL Motor LV
EXE Rise D8+ 1000kg 25m Height of Lift (HOL) Motor with Low Voltage (LV) control
The EXE Rise D8+ 1000kg Motor / chain hoist is ready to hire now from IPS. Electric Chain Hoists (or ‘Motors’ as they are also commonly known) are an ideal choice for event rigging. Hirers can use these three-phase powered models on their own via a 1-way controller (or pickle) or in multi-hoist configurations. Featuring low voltage control (LV) these motors are widely compatible with a range of control systems. Double braked, and compliant with D8+ standards, these hoists meet all rider specification criteria for event and entertainment projects.
The EXE Rise range is made from extremely light cast aluminium. This one ton model has a compact body size – officially named ‘Medium Frame’ in EXE terminology. The IPS hire stock versions tip the scales at 83.5kg including the chain. Speaking of chains, the IPS hire stock 1000kg EXE Rise motors feature a useful 25m Height of Lift. This makes these work well in most venues as a straight drop – and comfortably work in a motor down configuration for a ground support for towers up to 12m tall.
Designed for smooth operation, the EXE Rise electric chain hoist operates at a fixed speed of 4 metres per minute. Comparatively quiet in operation, these motors are ideal for soundstages, nightclubs, exhibition halls, concert halls, amphitheatres, and all kinds of indoor or outdoor venues. Check out the full manufacturer specification here.
Rigging ready to hire – and ready to use
Packaged in a tour ready wheeled flight case, our EXE Rise D8+ 1000kg Motors are ready to go. Ask us about the hire of optional rain covers if you are working outside. Supplied ready to rig with the chain run out, each motor has up-to-date LOLER and electrical test certificates available for the hire duration.
We also have a wide range of other Chain Hoist options including 500kg and 2000kg models. In stock now alongside 1 to 32 way control systems, motor power and control cable looms. Plus a huge selection of other event rigging hardware. Check out the full range of motors and control options ready to hire from IPS here.
EXE Rise D8+ 500kg 25m HOL Motor LV
EXE Rise D8+ 500kg 25m Height of Lift (HOL) Motor with Low Voltage (LV) control
The EXE Rise D8+ 500kg Motor / chain hoist is ready to hire now from IPS. Electric Chain Hoists (or ‘Motors’ as they are also commonly known) are an ideal choice for event rigging. Hirers can use these three-phase powered models on their own via a 1-way controller (or pickle) or in multi-hoist configurations. Featuring low voltage control (LV) these motors are widely compatible with a range of control systems. Double braked, and compliant with D8+ standards, these hoists meet all rider specification criteria for event and entertainment projects.
The EXE Rise range is made from extremely light cast aluminium. This half ton model has a compact body size – officially named ‘Medium Frame’ in EXE terminology. With a body self-weight of only 24kg, the IPS hire stock versions tip the scales at 46kg including the chain. Speaking of chains, the IPS hire stock 500kg EXE Rise motors feature a useful 25m Height of Lift. This makes these work well in most venues as a straight drop – and comfortably work in a motor down configuration for a ground support for towers up to 12m tall.
Designed for smooth operation, the EXE Rise electric chain hoist operates at a fixed speed of 4 metres per minute. Comparatively quiet in operation, these motors are ideal for soundstages, nightclubs, exhibition halls, concert halls, amphitheatres, and all kinds of indoor or outdoor venues. Check out the full manufacturer specification here.
Rigging ready to hire – and ready to use
Packaged in a tour ready wheeled flight case, our EXE Rise D8+ 500kg Motors are ready to go. Ask us about the hire of optional rain covers if you are working outside. Supplied ready to rig with the chain run out, each motor has up-to-date LOLER and electrical test certificates available for the hire duration.
We also have a wide range of other Chain Hoist options including 1000kg and 2000kg models. In stock now alongside 1 to 32 way control systems, motor power and control cable looms. Plus a huge selection of other event rigging hardware. Check out the full range of motors and control options ready to hire from IPS here.
SRS MCPH-DV-CEE 2 Way Motor Controller Direct Control Pickle
SRS MCPH-DV-CEE 2 Way Motor Controller Direct Control Pickle
Kinesys DigiHoist 32ch Motor Controller LV Socapex Powerlock
Kinesys DigiHoist 32ch Motor Controller LV Socapex Powerlock
Kinesys DigiHoist 16ch Motor Controller LV Socapex 63a3
Kinesys DigiHoist offers digital communications, limit monitoring, load and position feedback and group halt functionality in a compact package. At the core of the system is a digital communications link that enables multiple units to be daisy chained together. The units will automatically assign channels according to their position in the daisy chain. The high-resolution displays offer comprehensive channel feedback including channel number, status and load cell information.
The digital link incorporates SIL2 emergency stop connections which eliminate the need for shorting plugs in the system. Safety features include hoist presence indication, limit monitoring, and group halting on fault conditions.*
4ch Motor Controller Direct Control 32a 3ph Inlet
£34.50
