The Kinesys DigiHoist 8ch Motor Controller LV Socapex in Rack Case is ready to hire now from IPS. This is a great way to control up to 8 low voltage control chain hoists.

This is a single 8 channel Low Voltage Motor/Electric Chain Hoist control unit. An optional 8 channel remote control unit can be hired seperately if required, otherwise there are local controls and E-Stop on the unit front panel. Power inlet to the rack is via a 32a 3P CEE-Form connector on a short tail.

Motor outputs are via Socapex connectors. The controllers has two pairs of Socapex outputs. Each connector carries 4 ways of either data or power. This matches IPS motor power breakouts and LV control breakouts which are ready to hire along with a huge range of socapex multicore cabling.

Kinesys Motor Control Systems

The Kinesys brand is now owned by Tait. The Kinesys DigiHoist controller is still all the same hardware, but the panels have now been updated with the new Tait branding. You can check out the full controller specifications on their website here. IPS have a range of motor control systems in hire stock – if you are looking for a larger capacity Low Voltage control option, we also have Kinesys DigiHoist 16ch Motor Controller and Kinesys DigiHoist 32ch Motor Controller systems ready to hire, alongside 24 and 48 way systems from SRS Rigging.

The manufacturer description says the following: Kinesys DigiHoist offers digital communications, limit monitoring, load and position feedback and group halt functionality in a compact package. At the core of the system is a digital communications link that enables multiple units to be daisy chained together. The units will automatically assign channels according to their position in the daisy chain. The high-resolution displays offer comprehensive channel feedback including channel number, status and load cell information.
The digital link incorporates SIL2 emergency stop connections which eliminate the need for shorting plugs in the system. Safety features include hoist presence indication, limit monitoring, and group halting on fault conditions.

EXE Rise D8+ 2000kg 33m Height of Lift (HOL) Double Reeve Motor with Low Voltage (LV) control

The EXE Rise D8+ 2000kg Double Reeve Motor / chain hoist is ready to hire now from IPS.  Electric Chain Hoists (or ‘Motors’ as they are also commonly known) are an ideal choice for event rigging. Hirers can use these three-phase powered models on their own via a 1-way controller (or pickle) or in multi-hoist configurations. Featuring low voltage control (LV) these motors are widely compatible with a range of control systems. Double braked, and compliant with D8+ standards, these hoists meet all rider specification criteria for event and entertainment projects.

The EXE Rise range is made from extremely light cast aluminium. This monster two ton model has a relatively small body size for the capacity – officially named ‘Large Frame’ in EXE terminology. This means our versions are much smaller than the single drop chain versions from other suppliers.  The IPS hire stock versions tip the scales at 215kg including the chain. Speaking of chains, the IPS hire stock 2000kg EXE Rise motors feature a lenghty 33m Height of Lift. This makes these work well in higher venues as a straight drop – and comfortably work in a motor down configuration for a ground support for towers up to 15m tall (just remember double reeve means double runners needed on the header).

Designed for smooth operation, the EXE Rise electric chain hoist operates at a fixed speed of 4 metres per minute. Comparatively quiet in operation, these motors are ideal for soundstages, nightclubs, exhibition halls, concert halls, amphitheatres, and all kinds of indoor or outdoor venues. Check out the full manufacturer specification here.

Rigging ready to hire – and ready to use

Packaged in a tour ready wheeled flight case, our EXE Rise D8+ 2000kg Motors are ready to go. Ask us about the hire of optional rain covers if you are working outside. Supplied ready to rig with the chain run out, each motor has up-to-date LOLER and electrical test certificates available for the hire duration.

We also have a wide range of other Chain Hoist options including 500kg and 1000kg models. In stock now alongside 1 to 32 way control systems, motor power and control cable looms. Plus a huge selection of other event rigging hardware. Check out the full range of motors and control options ready to hire from IPS here.

EXE Rise D8+ 1000kg 25m Height of Lift (HOL) Motor with Low Voltage (LV) control

The EXE Rise D8+ 1000kg Motor / chain hoist is ready to hire now from IPS.  Electric Chain Hoists (or ‘Motors’ as they are also commonly known) are an ideal choice for event rigging. Hirers can use these three-phase powered models on their own via a 1-way controller (or pickle) or in multi-hoist configurations. Featuring low voltage control (LV) these motors are widely compatible with a range of control systems. Double braked, and compliant with D8+ standards, these hoists meet all rider specification criteria for event and entertainment projects.

The EXE Rise range is made from extremely light cast aluminium. This one ton model has a compact body size – officially named ‘Medium Frame’ in EXE terminology.  The IPS hire stock versions tip the scales at 83.5kg including the chain. Speaking of chains, the IPS hire stock 1000kg EXE Rise motors feature a useful 25m Height of Lift. This makes these work well in most venues as a straight drop – and comfortably work in a motor down configuration for a ground support for towers up to 12m tall.

Designed for smooth operation, the EXE Rise electric chain hoist operates at a fixed speed of 4 metres per minute. Comparatively quiet in operation, these motors are ideal for soundstages, nightclubs, exhibition halls, concert halls, amphitheatres, and all kinds of indoor or outdoor venues. Check out the full manufacturer specification here.

Rigging ready to hire – and ready to use

Packaged in a tour ready wheeled flight case, our EXE Rise D8+ 1000kg Motors are ready to go. Ask us about the hire of optional rain covers if you are working outside. Supplied ready to rig with the chain run out, each motor has up-to-date LOLER and electrical test certificates available for the hire duration.

We also have a wide range of other Chain Hoist options including 500kg and 2000kg models. In stock now alongside 1 to 32 way control systems, motor power and control cable looms. Plus a huge selection of other event rigging hardware. Check out the full range of motors and control options ready to hire from IPS here.

EXE Rise D8+ 1000kg 27m Height of Lift (HOL) Motor with Low Voltage (LV) control

The EXE Rise D8+ 1000kg Motor / chain hoist is ready to hire now from IPS. Electric Chain Hoists (or ‘Motors’ as they are also commonly known) are an ideal choice for event rigging. Hirers can use these three-phase powered models on their own via a 1-way controller (or pickle) or in multi-hoist configurations. Featuring low voltage control (LV) these motors are widely compatible with a range of control systems. Double braked, and compliant with D8+ standards, these hoists meet all rider specification criteria for event and entertainment projects. This specific version – EXE Rise D8+ LV 1000kg Motor – 27m HOL has a slightly longer chain giving a 27m height of lift (HOL) compared to our other 25m HOL option – ideal for when you need just a little bit more chain!!

Designed for smooth operation, the EXE Rise electric chain hoist operates at a fixed speed of 4 metres per minute. Comparatively quiet in operation, these motors are ideal for soundstages, nightclubs, exhibition halls, concert halls, amphitheatres, and all kinds of indoor or outdoor venues. Check out the full manufacturer specification here.

Rigging ready to hire – and ready to use

Packaged in a tour ready wheeled flight case, our EXE Rise D8+ 1000kg Motors are ready to go. Ask us about the hire of optional rain covers if you are working outside. Supplied ready to rig with the chain run out, each motor has up-to-date LOLER and electrical test certificates available for the hire duration.

We also have a wide range of other Chain Hoist options including 500kg and 2000kg models. Also ready to hire are 25m HOL versions of this same hoist. All in stock now alongside 1 to 48 way control systems, motor power and control cable looms. Plus a huge selection of other event rigging hardware. Check out the full range of motors and control options ready to hire from IPS here.

EXE Rise D8+ 500kg 25m Height of Lift (HOL) Motor with Low Voltage (LV) control

The EXE Rise D8+ 500kg Motor / chain hoist is ready to hire now from IPS.  Electric Chain Hoists (or ‘Motors’ as they are also commonly known) are an ideal choice for event rigging. Hirers can use these three-phase powered models on their own via a 1-way controller (or pickle) or in multi-hoist configurations. Featuring low voltage control (LV) these motors are widely compatible with a range of control systems. Double braked, and compliant with D8+ standards, these hoists meet all rider specification criteria for event and entertainment projects.

The EXE Rise range is made from extremely light cast aluminium. This half ton model has a compact body size – officially named ‘Medium Frame’ in EXE terminology.  With a body self-weight of only 24kg, the IPS hire stock versions tip the scales at 46kg including the chain. Speaking of chains, the IPS hire stock 500kg EXE Rise motors feature a useful 25m Height of Lift. This makes these work well in most venues as a straight drop – and comfortably work in a motor down configuration for a ground support for towers up to 12m tall.

Designed for smooth operation, the EXE Rise electric chain hoist operates at a fixed speed of 4 metres per minute. Comparatively quiet in operation, these motors are ideal for soundstages, nightclubs, exhibition halls, concert halls, amphitheatres, and all kinds of indoor or outdoor venues. Check out the full manufacturer specification here.

Rigging ready to hire – and ready to use

Packaged in a tour ready wheeled flight case, our EXE Rise D8+ 500kg Motors are ready to go. Ask us about the hire of optional rain covers if you are working outside. Supplied ready to rig with the chain run out, each motor has up-to-date LOLER and electrical test certificates available for the hire duration.

We also have a wide range of other Chain Hoist options including 1000kg and 2000kg models. In stock now alongside 1 to 32 way control systems, motor power and control cable looms. Plus a huge selection of other event rigging hardware. Check out the full range of motors and control options ready to hire from IPS here.

Prolyft 1000kg 27m HOL Direct Control Motor

Prolyft 1000kg 18m HOL Direct Control Motor

CM Prostar 250kg 12m HOL Direct Control Motor

Manual Chain Block 1000kg 10m Chain

SRS 48ch LV Motor Controller

This listing is for two of our 24 channel low voltage control systems, and the large 48 channel remote control. This forms our SRS 48ch LV Motor Controller.

The system is based around the SRS Rigging AHD-LV motor controller. To reach to 48 ways, two 24 channel system racks would be linked with a single remote. The design of the system means that any motor can be run individually, or selectable groups can run simultaniously. This includes all 48 ways at once if required.

The system includes two racks and an addtioanl conroller. Each rack is complete with two SRS AHD12-LV 12ch motor controllers and power distribution built in. The system would also include two 24-channel remote control handsets with a 20m control cable in each rack if needed. All data control link cable is included to join racks (just not the power links – see note below).

We also have a 24 channel version of this control system ready to hire – check out the details here.

The SRS motor control system has loads of great features. Some of the highlights are detailed on the SRS website here. Some of our favourite features for a hassle free set up include APA (Automatic phase sequence checking and alignment) and AVM (Automatic voltage check and hoist protection). Plus the group control feature is handy for running multiple units from one remote. We are also looking forward to using the RRST – Remote reset function. No more running back to the rack if someone hits the emergency stop by mistake.

Well Connected

Power input is via three phase PowerLock connectors. Plus there is a handy link output for when multiple racks are in use. The custom power distribution unit also includes 4x motor power outlets on the front panel. These are ideal for testing or running out chains next to the controller if needed. Each rack includes a further 2x motor power outlets to the rear, plus 2x auxilary 16A 1p outlets for local power too.

As this system consists of two racks, you would either need two PowerLock power supplies, or a PowerLock link cable to join the two units.

Outputs on the racks are via six pairs of socapex connectors. Wired to the IPS standard of 4-ways per soca, these outlets can either be directly connected to motor power and control fan / break outs or extended via socapex multicore cabling. Just remember that you need two runs of socapex, one for power and one for control when working with 4-way systems. Have a look in our rigging section for all the adaptors and looms you may need (scroll to the bottom for the cables), and check out our socapex hire listings here.

SRS 24ch LV Motor Controller

IPS 24 channel low voltage control system. Based around the SRS Rigging AHD-LV motor controller, we have created a linkable 24 channel system. Built into a robust rolling rack flight case for easy onsite handling. The SRS 24ch LV Motor Controller contains power distribution and remote controllers in a single box solution. Designed for operating electric chain hoists using low voltage control.

Each rack is complete with two SRS AHD12-LV 12ch motor controllers and power distribution built in. A rack drawer houses the 24 channel remote control handset with a 20m control cable. Plus a data control link cable is included to join racks.

We also have a 48 channel version of this control system ready to hire – check out the details here.

The SRS motor control system has loads of great features. Some of the highlights are detailed on the SRS website here. Some of our favourite features for a hassle free set up include APA (Automatic phase sequence checking and alignment),  AVM (Automatic voltage check and hoist protection). Plus the group control feature is handy for running multiple units from one remote. We are also looking forward to using the RRST – Remote reset function – no more running back to the rack if someone hits the emergency stop by mistake.

Well Connected

Power input is via three phase PowerLock connectors. Plus there is a handy link output for when multiple racks are in use. The custom power distribution unit also includes 4x motor power outlets on the front panel. These are ideal for testing or running out chains next to the controller if needed. There are a further 2x motor power outlets to the rear of the rack, plus 2x auxilary 16A 1p outlets for local power too.

Outputs on the racks are via six pairs of socapex connectors. Wired to the IPS standard of 4-ways per soca, these outlets can either be directly connected to motor power and control fan / break outs, or extended via socapex multicore cabling. Just remember that you need two runs of socapex, one for power and one for control when working with 4-way systems. Have a look in our rigging section for all the adaptors and looms you may need (scroll to the bottom for the cables), and check out our socapex hire listings here.

SRS 48 way LV Motor Control

This listing is for a 48 Way remote control handset for use with IPS SRS motor control racks. Using this SRS 48 way LV Motor Control, up to 48 motors / electric chain hoists can be controlled together. Or many more if the advanced features of the control system are used.

This controller is connected using a dedicated 20m 5pin 5core control cable that is supplied with each unit. Also provided with the IPS standard hire package is a 2m link cable. All housed in a briefcase style flight case.

The SRS model number for the remote is ADR48-DIGI-AHD-T19. This controller provides 48 physical switches for setting direction, as well as an E-Stop and the all-important “Go” button. Also on this controller is an LCD display with an encoder and selection buttons which can be used to set an address if required, as the SRS AHD Digital system is able to be configured to control up to 384 motors/hoists from one remote. Full manufacturer details are available here on the SRS website, including a downloadable user manual.

Compatibility

The SRS LV Control System is suitable for all motors/ hoists that use a Low Voltage (LV) control system – such as the range of EXE Rise D8+ models in stock at IPS. They are also fully compatible with Low Voltage control models from manufacturers including Chainmaster/Movecat/Liftket/Tourrig, CM lodestar, GIS, LITEC, Prolyft, Verlinde/Stagemaker. Essentially any three-phase chain hoist on the market.

Please note this listing is just for the 48-way remote controller. To use this to control your motors, you will also need further SRS hardware. Simply add 2x SRS 24 Way Control Racks for the actual control hardware – or hire it all together as a 48 way LV Motor control system here. The data link cable is already included, but you may also need an additional PowerLock Link cable or supply depending on your power configuration.

Hire the Kinesys DigiHoist 32ch Motor Controller now.

Catchily named in our inventory as the ‘Kinesys DigiHoist 32ch Motor Controller LV Socapex Powerlock’. This is a great way to control larger groups of chain hoists.

This is a 32 channel Low Voltage Motor/Electric Chain Hoist control rack. The rack consists of four 8 channel Kinesys DigiHoist controllers mounted in a pre-configured wheeled rack. The controllers are pre-linked, and the system is supplied with a 32 channel remote control . The rack also contains power distribution, with the incoming supply on a three-phase PowerLock connection. The rack also has a PowerLock Link-Out for easy power interconnection.

Motor outputs are via Socapex connectors. Each of the four controllers has two pairs of Socapex outputs. Each connector carries 4 ways of either data or power. This matches IPS motor power breakouts and LV control breakouts which are ready to hire along with a huge range of socapex multicore cabling.

The Kinesys brand is now owned by Tait. The Kinesys DigiHoist controller is still all the same hardware, but the panels have now been updated with the new Tait branding – check out the full controller specifications on their website here. IPS have a range of motor control systems in hire stock – if you are looking for a smaller Low Voltage control option, we also have a Kinesys DigiHoist 16ch Motor Controller ready to hire.

Hire the Kinesys DigiHoist 16ch Motor Controller now.

Catchily named in our inventory as the ‘Kinesys DigiHoist 16ch Motor Controller LV Socapex 63a3’. This is a great way to control l up to 16 chain hoists.

This is a 16 channel Low Voltage Motor/Electric Chain Hoist control rack. The rack consists of two 8 channel Kinesys DigiHoist controllers mounted in a pre-configured wheeled rack. The controllers are pre-linked, and the system is supplied with a 16 channel remote control . The rack also contains power distribution, with the incoming supply on a 63A 3-Phase connection.

Motor outputs are via Socapex connectors. Each of the two controllers has two pairs of Socapex outputs. Each connector carries 4 ways of either data or power. This matches IPS motor power breakouts and LV control breakouts which are ready to hire along with a huge range of socapex multicore cabling.

Kinesys Motor Control Systems

The Kinesys brand is now owned by Tait. The Kinesys DigiHoist controller is still all the same hardware, but the panels have now been updated with the new Tait branding – check out the full controller specifications on their website here. IPS have a range of motor control systems in hire stock – if you are looking for a larger capacity Low Voltage control option, we also have a Kinesys DigiHoist 32ch Motor Controller ready to hire.

The manufacturer description says the following: Kinesys DigiHoist offers digital communications, limit monitoring, load and position feedback and group halt functionality in a compact package. At the core of the system is a digital communications link that enables multiple units to be daisy chained together. The units will automatically assign channels according to their position in the daisy chain. The high-resolution displays offer comprehensive channel feedback including channel number, status and load cell information.
The digital link incorporates SIL2 emergency stop connections which eliminate the need for shorting plugs in the system. Safety features include hoist presence indication, limit monitoring, and group halting on fault conditions.

CM Pickle LV Motor Control

Looking for a 1-way control option for your low voltage (LV) electric chain hoist? Then the CM Pickle LV Motor Control is the product for you!

I’m not sure if anyone really knows where the name pickle comes from, but this is the industry standard way to locally control motors. Compact and easy to use, this is a must for any event rigger to make local adjustments.

Fitted with a CEEE-Form connector, the motor being operated will also need to be connected to a power supply for operation. Once connected, this remote provides push button options for up and down motor adjustment. Ideal for use with the IPS range of LV control motors, these include 500kg, 1000kg and 2000kg D8+ units from EXE Rise.

If you need a more complex control option, IPS also have an extensive stock of motor control options. These include 8 way, 16 way, 24 way, 32 way and 48 way systems for Low Voltage Chain Hoists. We also stock a wide range of motor cabling options – and also direct control systems too. This is alongside all the truss and rigging accessories you may need too. You can see all the details in the rigging section of our website here.

LTM 12 Ch Motor Controller Direct Control 63a 3ph

Prolyft 8ch Direct Motor Controller 32a3

Outboard DV8 8ch Motor Controller Direct Control

4ch Motor Controller Direct Control 32a 3ph Inlet

The 4ch Motor Controller Direct Control is a simple unit. Offering local control only, this unit has a 32A 3phase power inlet, and four direct control outlets. It’s robust construction, simple to use approach and attractive hire price mean this is a popular unit. Supplied in a compact flightcase, this controller is quick to deploy, and easy to use.

Only for use with direct control motors / chain hoists such as our 250kg Prostar or 1000kg Prolyft options.

If you are looking for a direct control option with more channels, we also stock a range of 8 and 12 channel controllers. Have a look here for our 8 way Prolyft controller, here for the modular 8 way Outboard Electronics version, and here for our 12 way control option. Plus we have a 2 channel unit which is about as close as we get to a pickle alternative for direct control.

IPS has an extensive range of motor control cabling to use with this too. Direct Control motor cable can be used to link the controller to motors point to point. If you need to work over greater distances, you can also use our socapex motor break in adpators to send four ways of control over standard multicore socapex too. You will also need soca break out adaptors for the motor end too.

32A/3PNE – 2x 16A 3PE Motor Split

Socapex Fan Out Motor Power Cable FEMALE 16a

This listing is for a Socapex Motor Power Fan Out adaptor. This is wired in the IPS standard style to carry four channels of motor power over a Socapex multicore cable. It uses a male 19‑pin Socapex inlet connector and four female 4‑pole 32A CEEform connectors at the outlet end. The adaptor uses HO7 cable. Many IPS motor controllers feature Socapex outputs, so you can use this adaptor directly with them. We also stock the male or break in motor controller adaptor for the other end. We have an extensive range of multicore socapex cabling perfect for use with this adaptor.

This adaptor is ready for use as part of a direct control motor system. Alternatively, you can use it in conjunction with a Low Voltage (LV) control fan out as part of a low voltage motor control system. IPS stock direct control motor cable in 3m, 5m, 10m, 20m, 25m, 30m and 50m lengths. We also offer a range of hire options for Low Voltage control systems too, including cable looms with both power and control – see our rigging hire section for more details.

IPS motor cabling is a reliable motor control solution designed for use with electric chain hoists / motors in the live entertainment and rigging industry. Built for demanding production environments, this cabling provides the power connection between hoists and motor controllers. Its robust construction ensures dependable performance during touring, festivals, corporate events and permanent installations. Flexible yet durable, it withstands repeated handling, long cable runs and challenging load‑in/out conditions. Fully compatible with industry‑standard hoist control systems, it offers safe, efficient operation for lifting and rigging applications. Ideal for professional riggers needing high‑quality, well‑maintained control cabling for any scale of event.

Socapex Fan Out Low Voltage Motor Cable MALE 16a

Socapex Fan In Motor Power Cable MALE 16a

This listing is for a Socapex Motor Power Fan in adaptor. This is wired in the IPS standard style to carry four channels of motor power over a Socapex multicore cable. It uses four male 4‑pole 32A CEEform connectors at the inlet end and a female 19‑pin Socapex outlet connector. The adaptor uses HO7 cable. This adaptor is handy when working with motor controllers without a direct socapex output – or for clever multicore patching arrangements. We of course also stock the female or break out motor controller adaptor for the other end. We have an extensive range of multicore socapex cabling perfect for use with this adaptor.

This adaptor is ready for use as part of a direct control motor system. Alternatively, you can use it in conjunction with a Low Voltage (LV) control fan out as part of a low voltage motor control system. IPS stock direct control motor cable in 3m, 5m, 10m, 20m, 25m, 30m and 50m lengths. We also offer a range of hire options for Low Voltage control systems too, including cable looms with both power and control – see our rigging hire section for more details.

IPS motor cabling is a reliable motor control solution designed for use with electric chain hoists / motors in the live entertainment and rigging industry. Built for demanding production environments, this cabling provides the power connection between hoists and motor controllers. Its robust construction ensures dependable performance during touring, festivals, corporate events and permanent installations. Flexible yet durable, it withstands repeated handling, long cable runs and challenging load‑in/out conditions. Fully compatible with industry‑standard hoist control systems, it offers safe, efficient operation for lifting and rigging applications. Ideal for professional riggers needing high‑quality, well‑maintained control cabling for any scale of event.

Socapex Fan In Low Voltage Motor Cable FEMALE 16a

Low Voltage Motor Cable Loom 30m

Low Voltage Motor Cable Loom 20m

Low Voltage Motor Cable Loom 15m

Low Voltage Motor Cable Loom 10m

Low Voltage Motor Cable Loom 5m

Low Voltage Motor Cable Loom 3m

Direct Control Motor Cable 50m

Suitable for use with direct control motors, this listing is for a 50m length of motor cable. The 50m is the longest cable in our range. IPS also stock direct control motor cable in 3m, 5m, 10m, 20m, 25m and 30m lengths. Plus we also offer motor control socapex break in and break out adaptors to use with our extensive range of multicore socapex cabling. IPS also offer a range options for Low Voltage control systems too, including cable looms with both power and control – see our rigging hire section for more details.

IPS direct control motor cable is made with HO7 cable, and fitted with a male 4-pole 32A CEEform connector at the plug/inlet end, and a female 4-pole 32A CEEform connector at the socket/outlet end.

A reliable motor control cable designed for use with electric chain hoists / motors in the live entertainment and rigging industry. Built for demanding production environments, this cable provides the power connection between hoists and motor controllers. Its robust construction ensures dependable performance during touring, festivals, corporate events and permanent installations. Flexible yet durable, it withstands repeated handling, long cable runs and challenging load‑in/out conditions. Fully compatible with industry‑standard hoist control systems, it offers safe, efficient operation for lifting and rigging applications. Ideal for professional riggers needing high‑quality, well‑maintained control cabling for any scale of event.

Direct Control Motor Cable 30m

Suitable for use with direct control motors, this listing is for a 30m length of motor cable. The 50m is the second longest cable in our range. IPS also stock direct control motor cable in 3m, 5m, 10m, 20m, 25m and 50m lengths. Plus we also offer motor control socapex break in and break out adaptors to use with our extensive range of multicore socapex cabling. IPS also offer a range options for Low Voltage control systems too, including cable looms with both power and control – see our rigging hire section for more details.

IPS direct control motor cable is made with HO7 cable, and fitted with a male 4-pole 32A CEEform connector at the plug/inlet end, and a female 4-pole 32A CEEform connector at the socket/outlet end.

A reliable motor control cable designed for use with electric chain hoists / motors in the live entertainment and rigging industry. Built for demanding production environments, this cable provides the power connection between hoists and motor controllers. Its robust construction ensures dependable performance during touring, festivals, corporate events and permanent installations. Flexible yet durable, it withstands repeated handling, long cable runs and challenging load‑in/out conditions. Fully compatible with industry‑standard hoist control systems, it offers safe, efficient operation for lifting and rigging applications. Ideal for professional riggers needing high‑quality, well‑maintained control cabling for any scale of event.

Direct Control Motor Cable 25m

Suitable for use with direct control motors, this listing is for a 25m length of motor cable. The 25m is the third longest cable in our range. IPS also stock direct control motor cable in 3m, 5m, 10m, 20m, 30m and 50m lengths. Plus we also offer motor control socapex break in and break out adaptors to use with our extensive range of multicore socapex cabling. IPS also offer a range options for Low Voltage control systems too, including cable looms with both power and control – see our rigging hire section for more details.

IPS direct control motor cable is made with HO7 cable, and fitted with a male 4-pole 32A CEEform connector at the plug/inlet end, and a female 4-pole 32A CEEform connector at the socket/outlet end.

A reliable motor control cable designed for use with electric chain hoists / motors in the live entertainment and rigging industry. Built for demanding production environments, this cable provides the power connection between hoists and motor controllers. Its robust construction ensures dependable performance during touring, festivals, corporate events and permanent installations. Flexible yet durable, it withstands repeated handling, long cable runs and challenging load‑in/out conditions. Fully compatible with industry‑standard hoist control systems, it offers safe, efficient operation for lifting and rigging applications. Ideal for professional riggers needing high‑quality, well‑maintained control cabling for any scale of event.

Direct Control Motor Cable 20m

Suitable for use with direct control motors, this listing is for a 20m length of motor cable. The 20m is the mid point length cable in our range. IPS also stock direct control motor cable in 3m, 5m, 10m, 25m, 30m and 50m lengths. Plus we also offer motor control socapex break in and break out adaptors to use with our extensive range of multicore socapex cabling. IPS also offer a range options for Low Voltage control systems too, including cable looms with both power and control – see our rigging hire section for more details.

IPS direct control motor cable is made with HO7 cable, and fitted with a male 4-pole 32A CEEform connector at the plug/inlet end, and a female 4-pole 32A CEEform connector at the socket/outlet end.

A reliable motor control cable designed for use with electric chain hoists / motors in the live entertainment and rigging industry. Built for demanding production environments, this cable provides the power connection between hoists and motor controllers. Its robust construction ensures dependable performance during touring, festivals, corporate events and permanent installations. Flexible yet durable, it withstands repeated handling, long cable runs and challenging load‑in/out conditions. Fully compatible with industry‑standard hoist control systems, it offers safe, efficient operation for lifting and rigging applications. Ideal for professional riggers needing high‑quality, well‑maintained control cabling for any scale of event.

Direct Control Motor Cable 10m

Suitable for use with direct control motors, this listing is for a 10m length of motor cable. The 10m is the third shortest cable in our range. IPS also stock direct control motor cable in 3m, 5m, 20m, 25m, 30m and 50m lengths. Plus we also offer motor control socapex break in and break out adaptors to use with our extensive range of multicore socapex cabling. IPS also offer a range options for Low Voltage control systems too, including cable looms with both power and control – see our rigging hire section for more details.

IPS direct control motor cable is made with HO7 cable, and fitted with a male 4-pole 32A CEEform connector at the plug/inlet end, and a female 4-pole 32A CEEform connector at the socket/outlet end.

A reliable motor control cable designed for use with electric chain hoists / motors in the live entertainment and rigging industry. Built for demanding production environments, this cable provides the power connection between hoists and motor controllers. Its robust construction ensures dependable performance during touring, festivals, corporate events and permanent installations. Flexible yet durable, it withstands repeated handling, long cable runs and challenging load‑in/out conditions. Fully compatible with industry‑standard hoist control systems, it offers safe, efficient operation for lifting and rigging applications. Ideal for professional riggers needing high‑quality, well‑maintained control cabling for any scale of event.

Direct Control Motor Cable 5m

Suitable for use with direct control motors, this listing is for a 5m length of motor cable. The 5m is the second shortest cable in our range. IPS also stock direct control motor cable in 3m, 10m, 20m, 25m, 30m and 50m lengths. Plus we also offer motor control socapex break in and break out adaptors to use with our extensive range of multicore socapex cabling. IPS also offer a range options for Low Voltage control systems too, including cable looms with both power and control – see our rigging hire section for more details.

IPS direct control motor cable is made with HO7 cable, and fitted with a male 4-pole 32A CEEform connector at the plug/inlet end, and a female 4-pole 32A CEEform connector at the socket/outlet end.

A reliable motor control cable designed for use with electric chain hoists / motors in the live entertainment and rigging industry. Built for demanding production environments, this cable provides the power connection between hoists and motor controllers. Its robust construction ensures dependable performance during touring, festivals, corporate events and permanent installations. Flexible yet durable, it withstands repeated handling, long cable runs and challenging load‑in/out conditions. Fully compatible with industry‑standard hoist control systems, it offers safe, efficient operation for lifting and rigging applications. Ideal for professional riggers needing high‑quality, well‑maintained control cabling for any scale of event.

Direct Control Motor Cable 3m

Suitable for use with direct control motors, this listing is for a 3m length of motor cable. The 3m is the shortest cable in our direct control range. IPS also stock direct control motor cable in 5m, 10m, 20m, 25m, 30m and 50m lengths. Plus we also offer motor control socapex break in and break out adaptors to use with our extensive range of multicore socapex cabling. IPS also offer a range options for Low Voltage control systems too, including cable looms with both power and control – see our rigging hire section for more details.

IPS direct control motor cable is made with HO7 cable, and fitted with a male 4-pole 32A CEEform connector at the plug/inlet end, and a female 4-pole 32A CEEform connector at the socket/outlet end.

A reliable motor control cable designed for use with electric chain hoists / motors in the live entertainment and rigging industry. Built for demanding production environments, this cable provides the power connection between hoists and motor controllers. Its robust construction ensures dependable performance during touring, festivals, corporate events and permanent installations. Flexible yet durable, it withstands repeated handling, long cable runs and challenging load‑in/out conditions. Fully compatible with industry‑standard hoist control systems, it offers safe, efficient operation for lifting and rigging applications. Ideal for professional riggers needing high‑quality, well‑maintained control cabling for any scale of event.