A 230mm X 230mm steel floor plate with a 29mm TV spigot receiver. The turtle plate has 4 x 6mm corner fixing holes.

Marquee Keder Clamp 150kg

An aluminium large Modular H frame with thru connectors often used to create a ladder frame for lanterns.

These H Frames can be connected together or connected to the small H Frames. Connections are made with our T45755 connector. Slots are provided for safety bonds.

A range of clamps/couplers are available fitted with a conical connector for suspension and Tank trap adaptors are also available enabling the H Frames to be floor-standing.

The industry standard half coupler. A high tensile extruded aluminium clamp that is suitable for 48mm to 51mm (1.89inch – 2.01inch) diameter tubes. It has a WLL of 750Kg and is 50mm (1.97inch) wide. Slotted to hold captive an M12 nut or bolt head. Ideal for trussing as it will not damage the cords.

The industry standard half coupler factory fitted with an Eye Nut. A high tensile extruded aluminium clamp that is suitable for 48mm to 51mm (1.89inch – 2.01inch) diameter tubes and is 50mm (1.97inch) wide. Ideal for trussing as it will not damage the cords.

The industry standard half coupler factory fitted with an Eye Nut. A high tensile extruded aluminium clamp that is suitable for 48mm to 51mm (1.89inch – 2.01inch) diameter tubes and is 50mm (1.97inch) wide. Ideal for trussing as it will not damage the cords.

A range of aluminium Boom Arms available in four sizes. They consist of a length of 48mm aluminium tube welded to a low profile high tensile extruded aluminium half coupler suitable for 48mm to 51mm diameter tube. Ideal for outrigging lanterns from vertical truss or tube.

A range of aluminium Boom Arms available in four sizes. They consist of a length of 48mm aluminium tube welded to a low profile high tensile extruded aluminium half coupler suitable for 48mm to 51mm diameter tube. Ideal for outrigging lanterns from vertical truss or tube.

A range of aluminium Boom Arms available in four sizes. They consist of a length of 48mm aluminium tube welded to a low profile high tensile extruded aluminium half coupler suitable for 48mm to 51mm diameter tube. Ideal for outrigging lanterns from vertical truss or tube.

A range of aluminium Boom Arms available in four sizes. They consist of a length of 48mm aluminium tube welded to a low profile high tensile extruded aluminium half coupler suitable for 48mm to 51mm diameter tube. Ideal for outrigging lanterns from vertical truss or tube.

A range of aluminium Pipe to Pipe Couplers available in five sizes. They consist of a length of 48mm aluminium tube with a low profile half coupler welded to each end suitable for 48mm to 51mm diameter tube. Ideal for suspending tubes or trussing.

A range of aluminium Pipe to Pipe Couplers available in five sizes. They consist of a length of 48mm aluminium tube with a low profile half coupler welded to each end suitable for 48mm to 51mm diameter tube. Ideal for suspending tubes or trussing.

A range of aluminium Pipe to Pipe Couplers available in five sizes. They consist of a length of 48mm aluminium tube with a low profile half coupler welded to each end suitable for 48mm to 51mm diameter tube. Ideal for suspending tubes or trussing.

The industry standard. The Doughty Tank Trap provides the means to support a 48mm vertical tube or scaffold pole and is ideal for side lighting. Consists of a 600mm square steel plate with a 48mm receiver welded to it. There is a cut out in the base to allow compact stacking for transport and storage.

Girder Clamp 1000kg ( 70mm – 245mm Beam )

Girder Clamp 2000kg (75mm – 230mm Beam)

Girder Clamp 3000kg ( 70mm – 355mm Beam )

Gravlock 60kg Girder Clamp 48mm Scaff (Use In Pairs)

Market Trader Clamp 6inch

Marquee Keder Clamp 250kg

Snap Brace 750mm

A steel multipurpose floor plate to suit 48mm barrel and truss. Fitted with a removable receiver which may be bolted in the centre, at the edge or in the corner of the plate. With the receiver removed the plate can be inverted and used as a base plate to suit various sizes of truss.

Does not include truss connectors or fixings to mount truss to the plate.

Tree & Pole Bracket MKII with 47cm Tube @ 50mm Diameter